ASTM D5498-12a(2018) Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
1.1 This guide is intended to assist those responsible for developing a program for the indoctrination and training of personnel performing coating and lining inspection work for nuclear facilities.
1.2 It is recognized that organizations and job responsibilities vary widely among utilities and also among various support and service companies. It is the responsibility of the user of this guide to identify the appropriate subject matter for its program and its specific needs.
1.3 Users of this guide must ensure that coating and lining work complies not only with this guide, but also with the licensee’s plant-specific quality assurance program and licensing commitments.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D5498-12a(2018) Referenced Document
ASTM D1005 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers*, 2020-06-01 Update
ASTM D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications
ASTM D2240 Standard Test Method for Properties of Rubber &8212; Durometer Hardness*, 2024-04-21 Update
ASTM D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D3276 Standard Guide for Painting Inspectors (Metal Substrates)*, 2021-11-01 Update
ASTM D3359 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D3363 Standard Test Method for Film Hardness by Pencil Test*, 2022-06-01 Update
ASTM D3843 Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities*, 2024-04-21 Update
ASTM D3925 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
ASTM D4138 Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means
ASTM D4212 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D4214 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D4258 Standard Practice for Surface Cleaning Concrete for Coating
ASTM D4259 Standard Practice for Abrading Concrete
ASTM D4260 Standard Practice for Acid Etching Concrete
ASTM D4261 Standard Practice for Surface Cleaning Concrete Unit Masonry for Coating
ASTM D4262 Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
ASTM D4263 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
ASTM D4285 Standard Test Method for Indicating Oil or Water in Compressed Air
ASTM D4414 Standard Practice for Measurement of Wet Film Thickness by Notch Gages*, 2020-06-01 Update
ASTM D4417 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
ASTM D4537 Standard Guide for Establishing Procedures to Qualify and Certify Inspection Personnel for Coating Work in Nuclear Facilities
ASTM D4538 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
ASTM D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D4610 Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings*, 2021-11-01 Update
ASTM D4752 Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
ASTM D4787 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
ASTM D4940 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
ASTM D5144 Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants*, 2024-04-21 Update
ASTM D5162 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates*, 2021-11-01 Update
ASTM D5163 Standard Guide for Establishing Procedures to Monitor the Performance of Safety Related Coatings in an Operating Nuclear Power Plant
ASTM D5402 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM D610 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM D6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Over Concrete Using an Ultrasonic Gage
ASTM D6237 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
ASTM D6386 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D6677 Standard Test Method for Evaluating Adhesion by Knife*, 2022-12-01 Update
ASTM D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals*, 2022-06-01 Update
ASTM D714 Standard Test Method for Evaluating Degree of Blistering of Paints
ASTM D7167 Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
ASTM D7234 Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers*, 2022-12-01 Update
ASTM D7682 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty*, 2022-06-01 Update
ASTM E337 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM F1869 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
ASTM F2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes*, 2019-12-01 Update
ASTM G12 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
ASTM G62 Standard Test Methods for Holiday Detection in Pipeline Coatings
NACE SP0178 Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to Be Lined for Immersion Service (Item No:21022)
NACE SP0188 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates*, 2024-01-26 Update
ASTM D5498-12a(2018) history
2018ASTM D5498-12a(2018) Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
2012ASTM D5498-12a Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
2012ASTM D5498-12 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
2009ASTM D5498-09 Standard Guide for Developing a Training Program for Personnel Performing Coating Work Inspection for Nuclear Facilities
2001ASTM D5498-01 Standard Guide for Developing a Training Program for Coating Work Inspectors in Nuclear Facilities
1994ASTM D5498-94(1999) Standard Guide for Developing a Training Program for Coating Work Inspectors in Nuclear Facilities