These requirements cover attachment plugs@ receptacles@ cord connectors@ inlets@ current taps provided with wiring terminals for flexible cord@ and flatiron and appliance plugs - all intended for connection to a branch circuit for use in accordance with the National Electrical Code@ ANSI/NFPA 70.These requirements do not cover devices rated at more than 200 A or for more than 600 V. See 6.1.This standard does not directly apply to@ but supplements the following standards:a) Devices produced integrally with flexible cord or cable@ covered by the Standard for Cord Sets and Power-Supply Cords@ UL 817;b) Current taps and adapters not provided with wiring terminals for flexible cord covered by the Standard for Current Taps and Adapters@ UL 498A;c) Devices employing male or female screwshells@ covered by the Standard for Edison-Base Lampholders@ UL 496;d) Devices solely intended for direct connection to the branch circuit in accordance with the National Electrical Code@ ANSI/NFPA 70@ that are provided with contacts of the pin and sleeve type@ covered by the Standard for Plugs@ Receptacles and Cable Connectors of the Pin-and-Sleeve Type@ UL 1682;e) Single and multipole connectors intended for factory assembly to copper or copper alloy conductors or printed wiring boards for use in data@ signal@ control and power applications within and between electrical equipment@ covered by the Standard for Component Connectors for Data@ Signal@ Control and Power Applications@ UL 1977;f) Devices intended for installation and use in hazardous (classified) locations in accordance with the National Electrical Code@ ANSI/NFPA 70@ covered by the Standard for Receptacle-Plug Combinations for Use in Hazardous (Classified) Locations@ UL 1010;g) Devices intended for use with telecommunications networks@ covered by the Standard for Telephone Equipment@ UL 1459@ or the Standard for Communications Circuit Accessories@ UL 1863;h) Devices incorporating ground-fault circuit interruption circuitry@ covered by the Standard for Ground-Fault Circuit Interrupters@ UL 943;i) Single- or two-outlet direct plug-in devices incorporating transient voltage surge suppression circuitry@ covered by the Standard for Transient Voltage Surge Suppressors@ UL 1449;j) Single- or two-outlet direct plug-in devices incorporating electromagnetic interference filter circuitry@ covered by the Standard for Electromagnetic Interference Filters@ UL 1283; ork) Cord-connected@ relocatable power taps intended only for indoor use as a temporary extension of a grounding alternating-current branch circuit for general use@ covered by the Standard for Relocatable Power Taps@ UL 1363.This Standard contains the following supplements:a) Supplement SA ?C Reserved for future use.b) Supplement SB ?C Enclosure Types for Environmental Protectionc) Supplement SC ?C Marine Shore Power Inletsd) Supplement SD ?C Hospital Grade Devices?
1970UL 498-2020 UL Standard for Safety Current Taps and Adapters - Section / Paragraph Reference: Subject: Magnetically Coupled Adapter (Edition 2: January 23@ 2008)
2019UL 498 CRD-2019 UL Standard for Safety Attachment Plugs and Receptacles - Section / Paragraph Reference: Definition@ Section 17.4@ Table 193.1 Subject: Configurable Plug (Edition 16: April 28@ 2017)
2019UL 498 BULLETIN-2019 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: March 25@ 2019)
2018UL 498 CRD-2018 UL Standard for Safety Attachment Plugs and Receptacles - Section / Paragraph Reference: 2.39.1; 12.6.1-12.6.3; 20.3@ 20.3.1; 30.7@ 30.7.1; 87.1; Section 91.4; 113.8; Section 128.4; Revised Marking Tables 193.2 and 193.4 Subject: Spring Action Terminal Cl
2018UL 498 BULLETIN-2018 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: October 1@ 2018)
2017UL 498 BULLETIN-2017 UL Standard for Safety Attachment Plugs and Receptacles
2016UL 498 CRD-2016 UL Standard for Safety Attachment Plugs and Receptacles - Section / Paragraph Reference: Tables 115.2 and 183.2 Subject: Horsepower Ratings for ANSI/NEMA configurations L25-30R and L26-30R (Edition 15: March 30@ 2012)
2016UL 498 BULLETIN-2016 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: January 16@ 2017)
2015UL 498 CRD-2015 UL Standard for Safety Attachment Plugs and Receptacles - Section / Paragraph Reference: Paragraph 116.1.4@ Table 184.4 Subject: Receptacles Identified for use with 75°C Insulated Conductors (Edition 15: March 30@ 2012)
2015UL 498 BULLETIN-2015 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: November 30@ 2015)
2014UL 498 CRD-2014 UL Standard for Safety Attachment Plugs and Receptacles - Section / Paragraph Reference: Para. SB3.1@ SB3.4@ SB6.1@ SB6.3@ Table SB6.1@ SB6.4@ SB6.5 and Table SB6.2 Subject: UL 498 UL 50E Reference Update (Edition 15: March 30@ 2012)
2014UL 498 BULLETIN-2014 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: JULY 7@ 2014)
2013UL 498 CRD-2013 UL Standard for Safety Attachment Plugs and Receptacles - Section/Paragraph Reference: Para. 2.38 (c)@ Sections 12@ 17@ 28@ 88A@ 124A@ Tables 88A.1@ 124A.1@ 184.2@ and 184.4 Subject: Receptacle Employing A Combination Wire Binding/Pressure -Type Terminal
2013UL 498 BULLETIN-2013 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: May 13@ 2013)
2012UL 498 CRD-2012 UL Standard for Safety Attachment Plugs and Receptacles - Section/Paragraph Reference: SUPPLEMENT SF Subject: RECEPTACLES WITH INTEGRAL POWER SUPPLY WITH CLASS 2 OUTPUT (Edition 15: March 30@ 2012)
2012UL 498 BULLETIN-2012 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: APRIL 30@ 2012)
2011UL 498 BULLETIN-2011 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: JULY 25@ 2011)
2010UL 498 BULLETIN-2010 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: November 01@ 2010)
2009UL 498 BULLETIN-2009 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: November 09@ 2009)
2008UL 498 CRD-2008 UL Standard for Safety Attachment Plugs and Receptacles - Section/Paragraph Reference: New Subject: Receptacle With Integral Thermal Interruption Mechanism (Edition 14: December 26@ 2001)
2008UL 498 BULLETIN-2008 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: MARCH 31@ 2008)
2007UL 498 BULLETIN-2007 UL Standard for Safety Attachment Plugs and Receptacles (COMMENTS DUE: May 21@ 2007)
2002UL 498 BULLETIN-2002 UL Standard for Safety Attachment Plugs and Receptacles
2001UL 498 BULLETINS-2001 UL Standard for Safety Attachment Plugs and Receptacles (09/21/2001 (6p); 08/22/2001 (14p); 05/10/2001 (6p))
2001UL 498-2001 UL Standard for Safety Attachment Plugs and Receptacles Fourteenth Edition; Reprint with Revisions Through and Including November 16, 2007.
2000UL 498 BULLETINS-2000 UL Standard for Safety Attachment Plugs and Receptacles (12/29/2000 (304p); 08/16/2000 (12p); 07/05/2000 (1p))