This document specifies requirements for non-alloy and alloy steels that are intended for cold heading or cold extruding and are delivered as wire rods, wire or bars. It also contains specific requirements for:
— steels not intended for heat treatment, with diameters from 2 mm to 100 mm (see Annex A);
— case-hardening steels with diameters from 2 mm to 100 mm (see Annex B);
— steels for quenching and tempering, including boron alloyed steels (see Table C.3), with diameters from 2 mm to 100 mm (see Annex C);
— stainless steels with diameters of 0,8 mm up to 50 mm for austenitic steels, up to 25 mm for ferritic steels and up to 100 mm for martensitic steels (see Annex D).
This document (except Annex A) is applicable to the properties of cold-headed or cold-extruded parts which have been subjected to a subsequent heat treatment. As the properties of the parts in the cold- headed or cold-extruded, and subsequently not-heat-treated condition, are largely dependent on the applied cold-heading or cold-extruding conditions, these are, if necessary, subject to agreement between the purchaser and the manufacturer of the parts.
ISO 4954:2021 Referenced Document
EN 10204 Metallic products - Types of inspection documents*, 2024-04-21 Update
ISO 1035-1 Hot-rolled steel bars; Part 1 : Dimensions of round bars
ISO 1035-2 Hot-rolled steel bars; Part 2 : Dimensions of square bars
ISO 1035-3 Hot-rolled steel bars; Part 3 : Dimensions of flat bars
ISO 1035-4 Hot-rolled steel bars; Part 4 : Tolerances
ISO 10474 Steel and steel products - Inspection documents
ISO 14284 Steel and iron — Sampling and preparation of samples for the determination of chemical composition*, 2022-10-25 Update
ISO 15549 Non-destructive testing — Eddy current testing — General principles
ISO 16124 Steel wire rod - Dimensions and tolerances (includes Redline Version)
ISO 16143-2 Stainless steels for general purposes - Part 2: Corrosion-resistant semi-finished products, bars, rods and sections
ISO 22034-2 Steel wire and wire products - Part 2: Tolerances on wire dimensions
ISO 3651-2 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid
ISO 377 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
ISO 3887 Steels — Determination of the depth of decarburization*, 2023-08-01 Update
ISO 404 Steel and steel products — General technical delivery requirements — Amendment 1*, 2022-11-01 Update
ISO 4885 Ferrous materials - Heat treatments - Vocabulary
ISO 4948-1 Steels; Classification; Part 1 : Classification of steels into unalloyed and alloy steels based on chemical composition
ISO 4948-2 Steels; Classification; Part 2 : Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics
ISO 4967:2013 Steel.Determination of content of non-metallic inclusions.Micrographic method using standard diagrams
ISO 642 Steel - Hardenability test by end quenching (Jominy test)
ISO 643 Steels — Micrographic determination of the apparent grain size
ISO 6508-1 Metallic materials — Rockwell hardness test — Part 1: Test method*, 2023-12-13 Update
ISO 683-1 Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering
ISO 683-18:2014 Heat-treatable steels, alloy steels and free-cutting steels - Part 18: Bright steel products
ISO 683-2 Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering
ISO 683-3 Heat-treatable steels, alloy steels and free-cutting steels*, 2024-01-01 Update
ISO 6892-1 Metallic materials — Tensile testing — Part 1: Method of test at room temperature