BS EN 590:2022
Automotive fuels. Diesel. Requirements and test methods
- Standard No.
- BS EN 590:2022
- Release Date
- 2023
- Published By
- British Standards Institution (BSI)
- Status
- Replace By
- BS EN 590:2022(2023)
- Latest
- BS EN 590:2022(2023)
- Scope
- 1 Scope This document specifies requirements and test methods for marketed and delivered automotive diesel fuel. It is applicable to automotive diesel fuel for use in diesel engine vehicles designed to run on automotive diesel fuel containing up to 7,0 %( V/V ) Fatty Acid Methyl Ester (FAME). NOTE For the purposes of this document, the terms “% ( m/m )” and “% ( V/V )” are used to represent respectively the mass fraction and the volume fraction.
BS EN 590:2022 Referenced Document
- EN 116 Diesel and domestic heating fuels - Determination of cold filter plugging point - Stepwise cooling bath method
- EN 12662 Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters
- EN 14078:2014 Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
- EN 15195:2014 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber
- EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method
- EN 16329 Diesel and domestic heating fuels - Determination of cold filter plugging point - Linear cooling bath method
- EN 16576:2014 Automotive fuels - Determination of manganese and iron content in diesel - Inductively coupled plasma optical emission spectrometry (ICP OES) method
- EN 16715:2015 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a constant volume combustion chamber with direct fuel injection
- EN 16906:2017 Liquid petroleum products - Determination of the ignition quality of diesel fuels - BASF engine method
- EN 16942 Fuels - Identification of vehicle compatibility - Graphical expression for consumer information
- EN 17155:2018 Liquid petroleum products - Determination of indicated cetane number (ICN) of middle distillate fuels - Primary reference fuels calibration method using a constant volume combustion chamber
- EN ISO 10370 Petroleum products - Determination of carbon residue - Micro method (ISO 10370:2014)
- EN ISO 12156-1 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2023)*， 2023-09-27 Update
- EN ISO 12185:1996 Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996)
- EN ISO 12205 Petroleum products - Determination of the oxidation stability of middle-distillate fuels (ISO 12205:1995)
- EN ISO 12937 Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000)
- EN ISO 13032:2012 Petroleum products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2012)
- EN ISO 13759 Petroleum products - Determination of alkyl nitrate in diesel fuels - Spectrometric method (ISO 13759:1996)
- EN ISO 20846:2019 Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2019)
- EN ISO 20884:2019 Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 20884:2019)
- EN ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998)
- EN ISO 22995 Petroleum products - Determination of cloud point - Automated step-wise cooling method
- EN ISO 2719 Determination of flash point - Pensky-Martens closed cup method - Amendment 1: Thermometers correction (ISO 2719:2016/Amd 1:2021)
- EN ISO 3015 Petroleum and related products from natural or synthetic sources - Determination of cloud point
- EN ISO 3104 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:2023)*， 2023-11-22 Update
- EN ISO 3170 Petroleum liquids - Manual sampling (ISO 3170:2004)
- EN ISO 3171 Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988)
- EN ISO 3405:2019 Petroleum and related products from natural or synthetic sources - Determination of distillation characteristics at atmospheric pressure
- EN ISO 3675:1998 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
- EN ISO 3924:2019 Petroleum products - Determination of boiling range distribution - Gas chromatography method (ISO 3924:2019)
- EN ISO 4259-2 Petroleum and related products - Precision of measurement methods and results - Part 2: Interpretation and application of precision data in relation to methods of test - Amendment 1 (ISO 4259-2:2017/Amd 1:2019)
- EN ISO 4264 Petroleum products - Calculation of cetane index of middle-distillate fuels by the four variable equation (ISO 4264:2018)
- EN ISO 5165:2020 Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2020)
- EN ISO 6245 Petroleum products - Determination of ash (ISO 6245:2001)
- ISO 23581 Petroleum products and related products — Determination of kinematic viscosity — Method by Stabinger type viscometer
BS EN 590:2022 history
- 0000 BS EN 590:2022(2023)
- 2023 BS EN 590:2022 Automotive fuels. Diesel. Requirements and test methods
- 2021 BS EN 590:2013+A1:2017 Automotive fuels. Diesel. Requirements and test methods
- 2013 BS EN 590:2013 Automotive fuels. Diesel. Requirements and test methods
- 2009 BS EN 590:2009+A1:2010 Automotive fuels - Diesel - Requirements and test methods
- 0000 BS EN 590:2009
- 2004 BS EN 590:2004 Automotive fuels - Diesel - Requirements and test methods
