This standard specifies the technical requirements, hardened layer depth, and hardness of rolling bearing parts made of carbon structural steels such as 08, 10, 15, and 20 (see Appendix A for foreign brands) and alloy structural steels such as 15CrMo and 20CrMo after carbonitriding heat treatment. Measurement and inspection procedures for the microstructure of carbonitrided layers. This standard is applicable to the above-mentioned carbon structural steel and alloy structural steel as well as low carbon steel cages and needle roller bearing stamped outer rings (thin-walled tensile outer rings) that can meet the requirements of this standard. Carbonitriding heat treatment (effective hardened layer Depth less than or equal to 0.30mm) quality inspection. If the total hardened layer depth is less than or equal to 0.30mm, the quality inspection of carburizing heat treatment for steel cages and stamped outer rings of needle roller bearings (thin-walled stretched outer rings) can also be carried out by reference.
JB/T 7363-2002 history
2023JB/T 7363-2023 Technical specifications for carbonitriding heat treatment of rolling bearing parts
2011JB/T 7363-2011 Rolling bearings.Bearing parts made from low-carbon steel.Specifications for carbonitriding heat-treatment
2002JB/T 7363-2002 Specifications for carbonitriding heat treatment of rolling bearing parts
1970JB/T 7363-1994 Specifications for carbonitriding heat treatment of rolling bearing parts