DIN EN 15316-1:2017
Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4; German version EN 15316-1:2017

Standard No.

DIN EN 15316-1:2017

Release Date

2017

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN 15316-1:2017-09

Latest

DIN EN 15316-1:2017-09

Replace

DIN EN 15316-1:2007 DIN EN 15316-1:2014

Scope

This European Standard is the general frame for the calculation of the energy use and the energy performance of heating and domestic hot water systems. This standards is only dealing with the heat, provided by water based systems, needed for heating, domestic hot water and cooling (e. g. absorption chiller). It specifies how to perform the calculation of the entire installation using the calculation modules (see Table 2) corresponding to the methods defined in the respective standards. It deals with common issues like operating conditions calculation and energy performance indicators. It standardises the inputs and outputs in order to achieve a common European calculation method. It allows the energy analysis of the heating and Domestic hot water systems and sub-systems including control (emission, distribution, storage, generation) by comparing the system losses and by defining energy performance indicators. The performance analysis allows the comparison between systems and sub-systems and makes possible to evaluate the impact of each sub-system on the energy performance of a building. The calculation of the system losses of each part of the heating sub-systems is defined in subsequent standards. Ventilation systems are not included in this standard (e. g. balanced systems with heat recovery), but if the air is preheated or an air heating system is installed, the systems providing the heat to the AHU (Air Handling Unit) are covered by this standard. In Germany Directive 2010/31/EU of the European Parliament and of the Council on the energy performance of buildings is implemented by the national Energieeinsparrecht. The national Energieeinsparrecht is based on national and European Standards and national pre-Standards, which have been specified for implementation in Germany.

DIN EN 15316-1:2017 Referenced Document

• EN 15316-3:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 3: Space distribution systems (DHW@ heating and cooling)@ Module M3-6@ M4-6@ M8-6
• EN ISO 52000-1:2017 Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017)
• EN ISO 7345:1995 Thermal Insulation - Physical Quantities and Definitions ISO 7345 : 1987

DIN EN 15316-1:2017 history

• 2017 DIN EN 15316-1:2017-09 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4; German version EN 15316-1:2017
• 2017 DIN EN 15316-1:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4; German version EN 15316-1:2017
• 2007 DIN EN 15316-1:2007 Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General; German version EN 15316-1:2007
• 0000 DIN EN 15316-1:2005