IEC 61010-2-120:2016
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment

Standard No.

IEC 61010-2-120:2016

Release Date

2016

Published By

International Electrotechnical Commission (IEC)

Latest

IEC 61010-2-120:2016

Replace

IEC 66/601/FDIS:2016

Scope

This clause of Part 1 is applicable except as follows: Equipment included in scope Addition: Add the following new paragraph before the first paragraph: This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope@ but shall also be used by technical committees in the preparation of their publications for products similar to those mentioned in the scope of this standard@ in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. Replacement: Replace the first paragraph with the following: This Part 2 of IEC 61010 specifies particular safety requirements for the following types of electrical equipment and their accessories@ wherever they are intended to be used@ which fall under a)@ b)@ or c) below and present HAZARDS from the power driven moving parts according to one or more of the items 1) to 5) used by the equipment for a specific application. 1) An assembly@ fitted with or intended to be fitted with a drive system other than directly applied human or animal effort@ consisting of linked parts or components@ at least one of which moves@ and which are joined together for a specific application. 2) An assembly referred to in item 1)@ missing only the components to connect it on site or to sources of energy and motion. 3) An assembly referred to in items 1) and 2)@ ready to be installed and able to function as it stands only if mounted on a means of transport@ or installed in a building or a structure. 4) Assemblies referred to in items 1)@ 2) and 3) or partly completed assemblies which@ in order to achieve the same end@ are arranged and controlled so that they function as an integral whole. A partly completed assembly is equipment which cannot perform a specific application by itself. A partly completed assembly is only intended to be incorporated into@ or assembled with@ other equipment@ thereby forming equipment to which this standard applies. 5) An assembly of linked parts or components@ at least one of which moves and which are joined together@ intended for lifting loads and whose only power source is directly applied human effort. Addition: Add the following paragraph at the end of the subclause: all or part of the equipment falls within the scope of one or more other part 2 standards of IEC 61010 as well as within the scope of this standard@ it will also need to meet the requirements of those other Part 2 standards.

IEC 61010-2-120:2016 Referenced Document

• IEC 60947-5-5:1997 Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
• IEC 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
• IEC 62471:2006 Photobiological safety of lamps and lamp systems
• ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
• ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
• ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design
• ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs
• ISO 5349-1:2001 Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements
• ISO 7010:2011 Graphical symbols - Safety colours and safety signs - Registered safety signs

IEC 61010-2-120:2016 history

• 2016 IEC 61010-2-120:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment