ISO 5840-3:2021
Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques

Standard No.
ISO 5840-3:2021
Release Date
2021
Published By
International Organization for Standardization (ISO)
Latest
ISO 5840-3:2021
Scope
This document is applicable to all devices intended for implantation as a transcatheter heart valve substitute. This document is applicable to transcatheter heart valve substitutes and to the accessory devices, packaging and labelling required for their implantation and for determining the appropriate size of heart valve substitute to be implanted. This document establishes an approach for verifying/validating the design and manufacture of a transcatheter heart valve substitute through risk management. The selection of appropriate verification/validation tests and methods are to be derived from the risk assessment. The tests can include those to assess the physical, chemical, biological and mechanical properties of heart valve substitutes and of their materials and components. The tests can also include those for preclinical in vivo evaluation and clinical evaluation of the finished heart valve substitute. This document defines operational conditions and performance requirements for transcatheter heart valve substitutes where adequate scientific and/or clinical evidence exists for their justification. This document includes considerations for implantation of a transcatheter heart valve substitute inside a pre-existing prosthetic device (e.g. valve-in-valve and valve-in-ring configurations).

ISO 5840-3:2021 Referenced Document

  • ISO 10993-2 Biological evaluation of medical devices — Part 2: Animal welfare requirements*2022-11-03 Update
  • ISO 14155 Clinical investigation of medical devices for human subjects - Good clinical practice
  • ISO 14630 Non-active surgical implants - General requirements
  • ISO 14971 Medical devices - Application of risk management to medical devices
  • ISO 5840-1:2021 Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements

ISO 5840-3:2021 history

  • 2021 ISO 5840-3:2021 Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques
  • 2013 ISO 5840-3:2013 Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques
Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques



Copyright ©2024 All Rights Reserved