ISO 10093:2020
Plastics - Fire tests - Standard ignition sources

Standard No.
ISO 10093:2020
Release Date
2020
Published By
International Organization for Standardization (ISO)
Latest
ISO 10093:2020
Scope
This document describes and classifies a range of laboratory ignition sources for use in fire tests on plastics and products consisting substantially of plastics. These sources vary in intensity and area of impingement. They are suitable for use to simulate the initial thermal abuse to which plastics are potentially exposed in certain actual fire risk scenarios. This compilation of standard ignition sources describes the ignition sources used by different standards development organizations and contained in standard test methods, specifications, or regulations used to assess the fire properties or plastics and of products containing plastic materials. The ignition sources described in this document are associated with flaming and non-flaming ignition. This document describes the relevant ignition sources and references the associated standard. This compilation of ignition sources does not discuss the application of the standard referenced in any specific clause in which the ignition source is described, and this compilation is likely not to be a fully comprehensive list of ignition sources. This document does not address detailed test procedures.

ISO 10093:2020 Referenced Document

  • IEC 60332-1-1 Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
  • IEC 60332-1-2 Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
  • IEC 60695-11-3 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
  • IEC 60695-11-4 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
  • IEC 60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
  • ISO 11925-2 Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test — Amendment 1
  • ISO 12136 Reaction to fire tests - Measurement of material properties using a fire propagation apparatus
  • ISO 12863 Standard test method for assessing the ignition propensity of cigarettes*， 2022-04-06 Update
  • ISO 12949 Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets
  • ISO 13943 Fire safety — Vocabulary*， 2023-09-01 Update
  • ISO 5657 Reaction to fire tests - Ignitability of building products using a radiant heat source
  • ISO 5658-2 Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration AMENDMENT 1
  • ISO 5659-2 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
  • ISO 5660-1 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) AMENDMENT 1
  • ISO 8191-1 Furniture; Assessment of the ignitability of upholstered furniture; Part 1 : Ignition source : smouldering cigarette
  • ISO 8191-2 Furniture; assessment of ignitability of upholstered furniture; part 2: ignition source: match-flame equivalent
  • ISO 871 Plastics — Determination of ignition temperature using a hot-air furnace*， 2022-02-23 Update
  • ISO 9705-1 Reaction to fire tests - Room corner test for wall and ceiling lining products - Part 1: Test method for a small room configuration
  • NFPA 260 Standard Methods of Tests and Classification System for Cigarette Ignition Resistance of Components of Upholstered Furniture errata*， 2024-01-01 Update
  • NFPA 261 Standard Method of Test for Determining Resistance of Mock-Up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes*， 2023-01-01 Update
  • NFPA 262 
  • NFPA 265 Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls Errata 265-23-1, Reference: 2.4, 3.3.1, 3.3.3, D.1.1*， 2023-03-07 Update
  • NFPA 270 
  • NFPA 286 Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth (Effective Date: 11/25/2018)
  • NFPA 287 
  • NFPA 289 Standard Method of Fire Test for Individual Fuel Packages Errata 289-23-1, Reference: C.1.1*， 2023-03-07 Update
  • UL 1666 Test for flame propagation height of electrical and optical-fiber cables installed vertically in shafts

ISO 10093:2020 history

Plastics - Fire tests - Standard ignition sources


Copyright ©2024 All Rights Reserved