ISO 15614-8:2016
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints

Standard No.
ISO 15614-8:2016
Release Date
2016
Published By
International Organization for Standardization (ISO)
Latest
ISO 15614-8:2016
Scope
This part of ISO 15614 speci fies requirements for the quali fication testing of welding procedures for the arc welding of tube to tube-plate joints in metallic materials by manual, partly mechanized, fully mechanized, or automatic processes. This part of ISO 15614 is a part of a series of standards. Details of this series are given in ISO 15607, Annex A. Quali fication by tube to tube-plate joint tests can be used for all joints even if they are fully loaded or only seal welded as required in application standards. This part of ISO 15614 applies to fusion welding of metallic materials for tube to tube-plate j oints with a remaining gap between the tube and the tube-plate for some length of the tube-plate thickness. This part of ISO 15614 does not apply to tube-sheets with forged end connections with welded tubes (external/internal bore welds) . For welding of tube to tube-plate j oints with mechanical expansion which is load bearing, welding procedure test is to be de fined. For other applications and/or requirements, this part of ISO 15614 can be used if required by the speci fication. Repair welding is to be considered in the welding procedure test.

ISO 15614-8:2016 Referenced Document

  • EN 1708-1:2010 Welding - Basic welded joint details in steel - Part 1: Pressurized components
  • ISO 14175:2008 Welding consumables - Gases and gas mixtures for fusion welding and allied processes
  • ISO 14732:2013 Welding personnel.Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
  • ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules
  • ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding
  • ISO 3452-1:2013 Non-destructive testing - Penetrant testing - Part 1: General principles
  • ISO 4063:2009 Welding and allied processes - Nomenclature of processes and reference numbers
  • ISO 6520-1:2007 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding
  • ISO 9015-1:2001 Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
  • ISO 9606-1:2012 Qualification testing of welders - Fusion welding - Part 1: Steels
  • ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys
  • ISO 9606-3:1999 Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys
  • ISO 9606-4:1999 Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys
  • ISO 9606-5:2000 Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys
  • ISO 9692-1:2013 Welding and allied processes.Types of joint preparation.Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding,TIG welding and beam welding of steels
  • ISO/TR 15608:2013 Welding - Guidelines for a metallic materials grouping system

ISO 15614-8:2016 history

  • 2016 ISO 15614-8:2016 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints
  • 2002 ISO 15614-8:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints



Copyright ©2024 All Rights Reserved