This part of JB/T 12474 specifies the working conditions, types and parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of vibrating feeders used with side-loading coal vertical tamping coke ovens . This section applies to the vibrating feeder used in vertical tamping coke ovens. It is used under the coal tower to feed the coal in the coal tower into the coal loading truck (or coal loading and coke pushing truck) in conjunction with the coal loading process. Coal chute. This section also applies to vibrating feeders on vehicle-mounted tamping and coal loading integrated vehicles.
JB/T 12474.11-2015 Referenced Document
GB 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coa
GB/T 985.1 Recommended joint preparation for gas welding,manual metal arc welding,gas-shield arc welding and beam welding
GB/T 985.2 Recommended joint preparation for submerged arc welding
JB/T 5000.1 Heavy mechanical general techniques and standards.Part 1: Check of product
JB/T 5000.10 Heavy mechanical general technical conditions Part 10: Assembly
JB/T 5000.12 Heavy mechanical general techniques and standards.Part 12: Paint
JB/T 5000.13 Heavy mechanicai general techniques and standards.Part 13: Packing
JB/T 5000.2 Heavy mecbanicai general techniques and standards. Part 2: Oxygen cutting workpiece
JB/T 5000.3 Heavy mectlanical general techniqueg.Part 3: And standards welding