DIN EN ISO 13766-2:2018
Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018); German version EN ISO 13766-2:2018

Standard No.

DIN EN ISO 13766-2:2018

Release Date

2018

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 13766-2:2018-12

Latest

DIN EN ISO 13766-2:2018-12

Replace

DIN EN 13309:2010 DIN EN ISO 13766-2:2016

Scope

This International Standard provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility of Building-, road-construction and earth moving machines as defined in ISO 6165 and ISO 8811 and covered by ISO/TC 127 respective ISO/TC 195. It deals with additionally EMC requirements under the aspect of Functional safety. General EMC-requirements under typical Surrounding conditions are covered in part 1 of ISO 13766. This standard is only relevant for functions of machines which have to fulfil requirements greater or equal SIL 1 as defined in ISO 15998 or greater or equal Performance Level b as defined in ISO 13849. Electrical and/or electronic component(s) or separate technical unit(s) intended to be fitted in construction machinery under the restriction of greater or equal SIL 1 or greater or equal Performance Level b - as applicable above - are also dealt with in this International Standard. The following electromagnetic disturbance phenomena are evaluated: - Radiated electromagnetic field by external sources; - Radiated electromagnetic field by sources located onboard (antenna inside/outside); - Magnetic fields; - Electrical field; - electrostatic discharge; - conducted and coupled electrical transients. Construction machinery can have DC and/or AC internal electrical power supply systems. Machines that are designed to be supplied by the "Public Mains Network" are specifically excluded.

DIN EN ISO 13766-2:2018 Referenced Document

• IEC 61000 Electromagnetic compatibility (EMC) - Part 6-8: Generic standards - Emission standard for professional equipment in commercial and light-industrial locations*， 2020-07-30 Update
• IEC 61000-1-2:2016 Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
• IEC 61000-2-10:1998 Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance
• IEC 61000-2-11:1999 Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMP environments
• IEC 61000-2-12:2003 Electromagnetic compatibility (EMC) - Part 2-12: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems; Basic EMC Publication
• IEC 61000-2-13:2005 Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments, radiated and conducted
• IEC 61000-2-2:2002 Electromagnetic compatibility (EMC) - Part 2-2: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
• IEC 61000-2-4:2002 Electromagnetic compatibility (EMC) - Part 2-4: Environment; Compatibility levels in industrial plants for low-frequency conducted disturbances
• IEC 61000-2-9:1996 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance - Basic EMC publication
• IEC 61000-3-11:2017 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A
• IEC 61000-3-12:2011 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current 16 A and 75 A per phase
• IEC 61000-3-2:2018 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
• IEC 61000-3-3:2013 Electromagnetic compatibility (EMC).Part 3-3: Limits.Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connectio
• IEC 61000-3-8:1997 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels

DIN EN ISO 13766-2:2018 history

• 2018 DIN EN ISO 13766-2:2018-12 Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018); German version EN ISO 13766-2:2018
• 2018 DIN EN ISO 13766-2:2018 Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018); German version EN ISO 13766-2:2018
• 1970 DIN EN ISO 13766-2 E:2016-04 Electromagnetic compatibility (EMC) of earthmoving and construction machinery with internal power supply Part 2: Additional EMC requirements for functional safety (draft)
• 2016 DIN EN ISO 13766-2 E:2016 Draft Document - Earth-moving machinery - Electromagnetic compatibility - Part 2: EMC under the aspect of functional safety (ISO/DIS 13766-2:2016); German and English version prEN ISO 13766-2:2016
• 2010 DIN EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply; German version EN 13309:2010

DIN EN ISO 13766-2:2018 Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018); German version EN ISO 13766-2:2018 has been changed from DIN EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply; German version EN 13309:2010.