International Organization for Standardization (ISO)
Latest
ISO 17640:2018
Scope
This document specifies techniques for the manual ultrasonic testing of fusion-welded joints in metallic materials of thickness ≥8 mm which exhibit low ultrasonic attenuation (especially that due to scatter) at object temperatures from 0 °C to 60 °C. It is primarily intended for use on full penetration welded joints where both the welded and parent material are ferritic.
Where material-dependent ultrasonic values are specified in this document, they are based on steels having an ultrasonic sound velocity of (5920 ± 50) m/s for longitudinal waves and (3255 ± 30) m/s for transverse waves.
This document specifies four testing levels, each corresponding to a different probability of detection of imperfections. Guidance on the selection of testing levels A, B, and C is given in Annex A.
This document specifies that the requirements of testing level D, which is intended for special applications, be in accordance with general requirements. Testing level D can only be used when defined by specification. This includes tests of metals other than ferritic steel, tests on partial penetration welds, tests with automated equipment, and tests at object temperatures outside the range 0 °C to 60 °C.
This document can be used for the assessment of discontinuities, for acceptance purposes, by either of the following techniques:
a) evaluation based primarily on length and echo amplitude of the discontinuity;
b) evaluation based on characterization and sizing of the discontinuity by probe movement techniques.
ISO 17640:2018 Referenced Document
EN 12668-1:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
EN 12668-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
EN 12668-3:2013 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment*, 2024-04-20 Update
ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
ISO 16810:2012 Non-destructive testing - Ultrasonic testing - General principles
ISO 16811:2012 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
ISO 16826:2012 Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface
ISO 17635:2016 Non-destructive testing of welds - General rules for metallic materials
ISO 23279:2017 Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds
ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel
ISO 17640:2018 history
2018ISO 17640:2018 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
2017ISO 17640:2017 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
2010ISO 17640:2010 Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
2005ISO 17640:2005 Non-destructive testing of welds - Ultrasonic testing of welded joints