ISO 15590-1:2018
Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends

Standard No.

ISO 15590-1:2018

Release Date

2018

Published By

International Organization for Standardization (ISO)

Latest

ISO 15590-1:2018

Scope

This document specifies the technical delivery conditions for bends made by the induction bending process for use in pipeline transportation systems for the petroleum and natural gas industries as defined in ISO 13623. This document is applicable to induction bends made from seamless and welded pipe of unalloyed or low-alloy steels. NOTE These are typically C-Mn steels or low-alloy steels that are appropriate for the corresponding level and grade of line pipe in accordance with ISO 3183. This document specifies the requirements for the manufacture of two product specification levels (PSLs) of induction bends corresponding to product specification levels given for pipe in ISO 3183. This document is not applicable to the selection of the induction bend PSL. It is the responsibility of the purchaser to specify the PSL, based upon the intended use and design requirements; see also ISO 3183, Introduction. This document is not applicable to pipeline bends made by other manufacturing processes.

ISO 15590-1:2018 Referenced Document

• ASTM A370-17 Standard Test Methods and Definitions for Mechanical Testing of Steel Products*， 2024-04-20 Update
• ASTM A435/A435M-17 Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates*， 2024-04-20 Update
• ASTM A578/A578M-17 Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications*， 2024-04-20 Update
• ASTM E112-13 Standard Test Methods for Determining Average Grain Size*， 2024-04-20 Update
• ASTM E165-09 Standard Practice for Liquid Penetrant Examination for General Industry*， 2024-04-20 Update
• ASTM E18-17 Standard Test Methods for Rockwell Hardness of Metallic Materials
• ASTM E213-14 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing*， 2024-04-20 Update
• ASTM E214-05 Standard Practice for Immersed Ultrasonic Examination by the Reflection Method Using Pulsed Longitudinal Waves*， 2024-04-20 Update
• ASTM E340-15 Standard Practice for Macroetching Metals and Alloys*， 2024-04-20 Update
• ASTM E709-15 Standard Guide for Magnetic Particle Testing*， 2024-04-20 Update
• ASTM E797-05 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method*， 2024-04-20 Update
• ASTM E92-17 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
• ASTM G39-99 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
• ISO 10474:2013 Steel and steel products - Inspection documents
• ISO 10893-4:2011 Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
• ISO 10893-5:2011 Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
• ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method
• ISO 3183:2012 Petroleum and natural gas industries - Steel pipe for pipeline transportation systems
• ISO 6507-1:2018 Metallic materials - Vickers hardness test - Part 1: Test method
• ISO 6507-2:2018 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines
• ISO 6507-3:2018 Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks
• ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
• ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method
• ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters
• ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks
• ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
• ISO 6892-2:2018 Metallic materials - Tensile testing- Part 2:Method of test at elevated temperature
• ISO 7438:2016 Metallic materials - Bend test
• ISO 7539-2:1989 Corrosion of metals and alloys - Stress corrosion testing - Part 2: Preparation and use of bent-beam specimens
• ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou
• ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel

ISO 15590-1:2018 history

• 2018 ISO 15590-1:2018 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
• 2009 ISO 15590-1:2009 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends
• 2001 ISO 15590-1:2001 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends