DIN EN 1149-5:2018
Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements; German version EN 1149-5:2018

Standard No.

DIN EN 1149-5:2018

Release Date

2018

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN 1149-5:2018-11

Latest

DIN EN 1149-5:2018-11

Replace

DIN EN 1149-5:2008 DIN EN 1149-5:2016

Scope

This European Standard specifies material and design requirements for electrostatic dissipative protective clothing, including hoods and caps, used as part of a total earthed system, to avoid incendiary discharges, where the minimum ignition energy of an explosive atmosphere is not less than 0,016 mJ. In the context of this European Standard, a total earthed system is one in which personnel and other conductors are connected to earth via a resistance of less than 108 Ω. The material and design requirements do not presume adequate earthing of additional equipment worn or carried in contact with clothing, e. g. breathing apparatus, etc. If such additional equipment is required to be earthed, other requirements beyond the scope of this European Standard may be necessary. The scope of this standard does not include electrostatic dissipative protective gloves or footwear that are separate and not integral parts of garments. The material and design requirements may not provide sufficient protection in oxygen enriched flammable atmospheres. NOTE Additional information about oxygen enriched flammable atmospheres can be found in CEN/CLC/TR 16832:2015. This European Standard is not applicable for protection against mains voltages.

DIN EN 1149-5:2018 Referenced Document

• CEN/CLC/TR 16832-2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)
• DIN ISO 7000:2008 Graphical symbols for use on equipment - Index and synopsis (ISO 7000:2004 + ISO 7000 Database:2008 up to ISO 7000-2750);English version of DIN ISO 7000:2008-12
• EN 1149-1:2006 Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity
• EN 1149-3:2004 Protective clothing - Electrostatic properties - Part 3: Test method for measurement of charge decay
• EN 16350:2014 Protective gloves - Electrostatic properties
• EN 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres (Incorporating corrigendum November 2015)
• EN 60079-10-2:2015 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
• EN 60079-32-2:2015 Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests
• EN ISO 13688:2013 Protective clothing - General requirements
• EN ISO 15797:2018 Textiles - Industrial washing and finishing procedures for testing of workwear
• EN ISO 20345:2011 Personal protective equipment - Safety footwear (ISO 20345:2011)*， 2024-04-20 Update
• EN ISO 3175-2:2018 Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene (ISO 3175-2:2017, Corrected version 2019-12)
• EN ISO 5084:1996 Textiles - Determination of Thickness of Textiles and Textile Products ISO 5084 : 1996
• EN ISO 6330:2012 Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012)
• ISO 7000:2014 Graphical symbols for use on equipment - Registered symbols

DIN EN 1149-5:2018 history

• 2018 DIN EN 1149-5:2018-11 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements; German version EN 1149-5:2018
• 2018 DIN EN 1149-5:2018 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements; German version EN 1149-5:2018
• 2008 DIN EN 1149-5:2008 Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements; English version of DIN EN 1149-5:2008-04
• 0000 DIN EN 1149-5:2005