DIN 51517-3:2018
Lubricants - Lubricating oils - Part 3: Lubricating oils CLP, Minimum requirements

Standard No.

DIN 51517-3:2018

Release Date

2018

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN 51517-3 E:2018-03

Latest

DIN 51517-3:2018-09

Replace

DIN 51517-3:2014

Scope

This document specifies minimum requirements for lubricating oils CLP which are primarily used for circulation and dip lubricating systems.

DIN 51517-3:2018 Referenced Document

• DIN 51502:1990 Designation of lubricants and marking of lubricant containers, equipment and lubricating points
• DIN 51506:2017 Lubricants - VB lubricating oils with and without additives and VDL lubricating oils - Classification and requirements
• DIN 51524-1:2017 Pressure fluids - Hydraulic oils - Part 1: HL hydraulic oils, Minimum requirements
• DIN 51757:2011 Testing of mineral oils and related materials - Determination of density
• DIN 51777-2:1974 Testing of Mineral Oil Hydrocarbons and Solvents; Determination of Water Content according to Karl Fischer; Indirect Method
• DIN 51819-3:2016 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 3: Test method for lubricating oils - applied test bearing: axial cylindrical roller bearing
• DIN EN ISO 2160:1999 Petroleum products - Corrosiveness to copper - Copper strip test (ISO 2160:1998); German version EN ISO 2160:1998
• DIN EN ISO 2592:2018 Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017)
• DIN EN ISO 3104:1999 Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994 + Cor. 1:1997); German version EN ISO 3104:1996 + AC:1999
• DIN EN ISO 4259-1:2018 Petroleum and related products - Precision of measurement methods and results - Part 1: Determination of precision data in relation to methods of test
• DIN EN ISO 4263-4:2006 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 4: Procedure for industrial gear oils (ISO 4263-4:2006); English version of DIN EN ISO 4263-4:2006-05
• DIN ISO 13226:2015 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011)
• DIN ISO 1817:2016 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids (ISO 1817:2015)
• DIN ISO 2909:2004 Petroleum products - Calculation of viscosity index from kinematic viscosity (ISO 2909:2002)
• DIN ISO 3448:2010 Industrial liquid lubricants - ISO viscosity classification (ISO 3448:1992)
• DIN ISO 6614:2002 Petroleum products - Determination of water separability of petroleum oils and synthetic fluids (ISO 6614:1994)
• DIN ISO 6618:2015 Petroleum products and lubricants - Determination of acid or base number - Colour-indicator titration method (ISO 6618:1997)
• DIN ISO 6743-99:2012 Lubricants, industrial oils and related products (class L) - Classification - Part 99: General (ISO 6743-99:2002)
• DIN ISO 7120:2000 Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the presence of water (ISO 7120:1987)
• ISO ISO IEC 27001-2013 cor2-2015 technical errata*， 2024-04-20 Update
• ISO 6247:1998 Petroleum products - Determination of foaming characteristics of lubricating oils
• ISO 6743-1:2002 Lubricants, industrial oils and related products (class L) - Classification - Part 1: Family A (Total loss systems)
• ISO 6743-2:1981 Lubricants, industrial oils and related products (class L); Classification; Part 2 : Family F (Spindle bearings, bearings and associated clutches)
• ISO 6743-3:2003 Lubricants, industrial oils and related products (class L) - Classification - Part 3: Family D (Compressors)
• ISO 6743-4:2015 Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems)
• ISO 6743-5:2006 Lubricants, industrial oils and related products (class L) - Classification - Part 5: Family T (Turbines)
• ISO 6743-6:2018 Lubricants, industrial oils and related products (class L) - Classification - Part 6: Family C (gear systems)
• ISO 6743-7:1986 Lubricants, industrial oils and related products (class L); Classification; Part 7 : Family M (Metalworking)

DIN 51517-3:2018 history

• 2018 DIN 51517-3:2018-09 Lubricants - Lubricating oils - Part 3: Lubricating oils CLP, Minimum requirements
• 1970 DIN 51517-3 E:2018-03 Lubricants - Lubricating oils - Part 3: Lubricating oils CLP, Minimum requirements
• 2018 DIN 51517-3:2018 Lubricants - Lubricating oils - Part 3: Lubricating oils CLP, Minimum requirements
• 2014 DIN 51517-3:2014 Lubricants - Lubricating oils - Part 3: Lubricating oils CLP, Minimum requirements
• 1970 DIN 51517-3 A1 E:2012-07
• 2011 DIN 51517-3:2011 Lubricants - Lubricating oils - Part 3: Lubricating oils CLP; Minimum requirements
• 2009 DIN 51517-3:2009 Lubricants - Lubricating oils - Part 3: Lubricating oils CLP; Minimum requirements
• 2004 DIN 51517-3:2004 Lubricants - Lubricating oils - Part 3: Lubricating oils CLP; Specifications
• 1970 DIN 51517-3:1989 Lubricants - Lubricating oils - Part 3: Lubricating oils CLP, Minimum requirements