ISO 20780:2018
Space systems - Fiber optic components - Design and verification requirements

Standard No.

ISO 20780:2018

Release Date

2018

Published By

International Organization for Standardization (ISO)

Latest

ISO 20780:2018

Scope

This document specifies requirements for the design and verification of fibre optic components used in space fibre optic sub-systems. In this document, the requirements are established to assure the reliability and environmental adaptability of fibre optic components in space environmental conditions. These are in a range of applications such as ground systems, unmanned applications and manned systems. This document suggests a set of requirements to be applied to the selection of space fibre optic components.

ISO 20780:2018 Referenced Document

• IEC 60050-191:1990 International electrotechnical vocabulary; chapter 191: dependability and quality of service
• IEC 60793-2:2015 Optical fibres - Part 2: Product specifications - General
• IEC 60794-2:2017 Optical fibre cables - Part 2: Indoor cables - Sectional specification
• IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
• IEC 60869-1:2012 Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification
• IEC 60874-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
• IEC 60875-1:2015 Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification
• IEC 60876-1:2014 Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification
• IEC 61202-1:2016 Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification
• IEC 61274-1:2011 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification
• IEC 61281-1:2017 Sous-systèmes de télécommunications fibroniques - Partie 1: Spécification générique (Edition 2.0)
• IEC 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
• IEC 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
• IEC 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
• IEC 61290-1:2014 Optical amplifiers - Test methods - Part 1: Optical power and gain parameters
• IEC 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters; Optical spectrum analyzer method
• IEC 61290-3-2:2008 Amplificateurs optiques – Méthodes d’essais - Partie 3-2: Paramètres du facteur de bruit – Méthode de l’analyseur spectral électrique (Edition 2.0)
• IEC 61290-3-3:2013 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
• IEC 61290-3:2008 Optical amplifiers - Test methods - Part 3: Noise figure parameters
• IEC 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
• IEC 61290-4-2:2011 Optical amplifiers – Test methods – Part 4-2: Gain transient parameters – Broadband source method (Edition 1.0)
• IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
• IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
• IEC 61290-5-1:2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyser method
• IEC 61290-5-2:2003 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters; Electrical spectrum analyser method
• IEC 61290-5-3:2002 Optical fibre amplifiers - Basic specifications - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance test method using electrical spectrum analyzer
• IEC 61290-6-1:1998 Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer
• IEC 61290-7-1 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method

ISO 20780:2018 history

• 2018 ISO 20780:2018 Space systems - Fiber optic components - Design and verification requirements