DIN EN ISO 16228:2018
Fasteners - Types of inspection documents (ISO 16228:2017); German version EN ISO 16228:2018
- Standard No.
- DIN EN ISO 16228:2018
- Release Date
- 2018
- Published By
- German Institute for Standardization
- Status
- Replace By
- DIN EN ISO 16228:2018-05
- Latest
- DIN EN ISO 16228:2018-05
- Replace
- DIN 11204:2008 DIN EN ISO 16228:2015
- Scope
- This International standard specifies the different types of fastener inspection documents, issued by the fastener manufacturer or distributor and/or by the external authorized representative, on specific request of the purchaser at the time of the order:- declaration of compliance (F2.1),- test reports (F2.2, F3.1, F3.2 and F3.3). NOTE: The term "certificate" is in common use, however for fastener inspection documents the terminology to be used is "test report". It specifies requirements for the content of each fastener inspection document, in conjunction with the order, the relevant standards and/or specified requirements.This International standard applies to finished fasteners such as bolts, screws, studs, nuts, washers, pins, rivets, etc. made of steel, stainless steel, non-ferrous metal or non-metallic material.This International Standard is not intended for special-purpose or specially engineered applications requiring other types of procedures (e. g. initial samples). Examples of inspection documents are given in Annex A (informative). An example of a coding system identifying the sections in fastener inspection documents is given in Annex B (informative).
DIN EN ISO 16228:2018 Referenced Document
- DIN EN 10204:2005 Metallic products - Types of inspection documents; German version EN 10204:2004
- DIN EN 26157-1:1991 Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
- DIN EN 26157-3:1991 Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
- DIN EN ISO 225:2011 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010); Multilingual version EN ISO 225:2010
- DIN EN ISO 2320:2016 Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015); German version EN ISO 2320:2015
- DIN EN ISO 2702:2011 Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011); German version EN ISO 2702:2011
- DIN EN ISO 3269:2000 Fasteners - Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000
- DIN EN ISO 3506-1:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009); German version EN ISO 3506-1:2009
- DIN EN ISO 3506-2:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009); German version EN ISO 3506-2:2009
- DIN EN ISO 3506-3:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009); German version EN ISO 3506-3:2009
- DIN EN ISO 3506-4:2010 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009); German version EN ISO 3506-4:2009
- DIN EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011); German version EN ISO 4014:2011
- DIN EN ISO 4032:2013 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012); German version EN ISO 4032:2012
- DIN EN ISO 4042:2001 Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999
- DIN EN ISO 4759-1:2001 Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000
- DIN EN ISO 6157-2:2004 Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004
- DIN EN ISO 7089:2000 Plain washers - Normal series, Product grade A (ISO 7089:2000); German version EN ISO 7089:2000
- DIN EN ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013); German version EN ISO 898-1:2013
- DIN EN ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012); German version EN ISO 898-2:2012
- DIN EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012); German version EN ISO 898-5:2012
- DIN EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015); German and English version EN ISO 9001:2015
DIN EN ISO 16228:2018 history
- 2018 DIN EN ISO 16228:2018-05 Fasteners - Types of inspection documents (ISO 16228:2017); German version EN ISO 16228:2018
- 2018 DIN EN ISO 16228:2018 Fasteners - Types of inspection documents (ISO 16228:2017); German version EN ISO 16228:2018
- 1970 DIN EN ISO 16228 E:2015-08 Fastener Inspection Document Type (Draft)
- 2015 DIN EN ISO 16228 E:2015 Draft Document - Fasteners - Inspection documents (ISO/DIS 16228:2015); German and English version prEN ISO 16228:2015
- 2008 DIN 11204:2008 Fasteners - Inspection documents - List of information and description
- 0000 DIN 11204:2007
DIN EN ISO 16228:2018 Fasteners - Types of inspection documents (ISO 16228:2017); German version EN ISO 16228:2018 has been changed from DIN 11204:2008 Fasteners - Inspection documents - List of information and description.
