This International Standard specifies the requirements for four classes of textile reinforced thermoplastic foldable water hoses for general purpose applications in a temperature range of -10°C to 55°C. Such hoses are classified into four classes as follows: Low pressure, designed for a maximum operating pressure of up to 0.4 MPa (4.0 bar) at 23 °C and up to 0.2 MPa (2.0 bar) at 55 °C ; Medium pressure, for a maximum operating pressure of up to 0.7 MPa (7.0 bar) at 23 °C and up to 0.36 MPa (3.6 bar) at 55 °C; High pressure, for a maximum operating pressure of up to 1.0 MPa (10.0 bar) at 23 °C and up to 0.51 MPa (5.1 bar) at 55 °C; Extra high pressure, for a maximum operating pressure of up to 1.55 MPa (15.5 bar) at 23 °C and up to 0.79 MPa (7.9 bar) at 55 °C. This International Standard does not apply to products for use in firefighting or transport of drinking water.
EN ISO 8029:2014 Referenced Document
ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature
ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
ISO 1307:2006 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 23529:2010 Rubber - General procedures for preparing and conditioning test pieces for physical test methods
ISO 30013:2011 Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties
ISO 37:2011 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
ISO 3:1973 Preferred numbers; Series of preferred numbers
ISO 8033:2006 Rubber and plastics hoses - Determination of adhesion between components
ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary
ISO 9352:2012 Plastics - Determination of resistance to wear by abrasive wheels
EN ISO 8029:2014 history
2014EN ISO 8029:2014 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014)
2010EN ISO 8029:2010 Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification [Superseded: CEN EN 28029]