This Technical Specification comes as a complement to the technical requirements expressed in CEN/TS 16794-1, Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443, for ensuring contactless communication interoperability between contactless fare management system terminals and contactless fare media hosting a transport ticketing application. This test plan lists all the test conditions to be performed on a contactless reader or a contactless fare media in order to ensure that all the requirements specified in CEN/TS 16794-1 are met for the device under test. This Technical Specification is then applicable to:- any contactless fare management system terminals acting as a PCD contactless reader based on ISO/IEC 14443-series standards; - any contactless fare media acting as a PICC contactless object based on ISO/IEC 14443-series standards. This test plan applies solely to the contactless communication layers described in parts 1 to 4 of the ISO/IEC 14443-series of standards. Application-to-application exchanges executed once contactless communication has been established at RF level fall outside the scope of this test plan. However, a transport ticketing application will need to be used so as to make end-to-end transactions during tests on the RF communication layer. This test plan does not duplicate the contents of ISO/IEC 14443-series or ISO/IEC 10373-6 standards. It makes reference to the ISO/IEC 10373-6 applicable tests methods, specifies the test conditions to be used and describes the additional specific test conditions that may be run. The list of test conditions applicable to the device under test will be conditioned by the Information Conformance Statement (ICS) declaration made by the device manufacturer. For each test case, the test conditions are clearly specified in order to determine the pertinence to run or not the test case in accordance with the device capabilities or in acco
PD CEN/TS 16794-2:2015 Referenced Document
ISO/IEC 10373-6:2011 Identification cards - Test methods - Part 6: Proximity cards
ISO/IEC 14443 Cards and security devices for personal identification — Contactless proximity objects — Part 4: Transmission protocol — Amendment 3: Time binding of PICC to PCD data interchange for enhanced detection of relay attacks