EN 16486:2014
Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements
- Standard No.
- EN 16486:2014
- Release Date
- 2014
- Published By
- European Committee for Standardization (CEN)
- Status
- 2018-09
- Replace By
- EN 16486:2014/PRA1:2018
- Latest
- EN 16486:2014/PRA1:2018
- Replace
- FprEN 16486-2014
- Scope
- This European Standard specifies the safety requirements for the design, manufacture and information for the safe use of compactors that compact waste material or recyclable fractions (e. g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials. This European Standard applies to:- compactors using a horizontally moving screw, pendulum or plate as compacting part and where the materials move horizontally; and; - compactors that are mechanically fed and/or fed by hand. These compactors can be; - static compactors; - transportable compactors; - traversing systems. The scope includes; - any integral mechanical feed equipment (e. g. bin lift); - feed hoppers/openings; - any integral pre-conditioning equipment in the hopper (e. g. perforators, pre-crushing devices and shredders); - any integral material flow control equipment; - the interface between the compactor and any feed equipment (except those excluded from the scope). The scope of this European Standard does not cover; - compactors that are covered by EN 1501 (all parts); - underground compactors, however if these compactors can be used above ground this standard applies; - compactors using thermal technologies for compaction; - vacuum compactors; - compactors where materials are compacted vertically; - containers for static compactors, however the interface between the compaction unit and the container is included; - bins in which materials are collected for feeding into the compactor; - any up-stream pre-treatment equipment that is not integral to the machine and is used to treat the materials before they are fed into the feed opening of the compactor; - vehicles including lifting equipment used to collect and transport the compactor or container; - cranes, lift trucks or other transportable plant used to load materials into the feed hopper/opening and the hazards arising out of using this equipment to load; - any suction or dust control equipment. This European standard do
EN 16486:2014 Referenced Document
- CLC/TS 61496 Safety of machinery — Electro sensitive protective equipment — Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
- CLC/TS 61496-2-2006 Safety of machinery - Electro-sensitive protective equipment Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
- EN 13306:2010 Maintenance - Maintenance terminology
- EN 1501-5:2011 Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles
- EN 60204-1:2006 Safety of machinery - Electrical equipment of machines Part 1: General requirements (Incorporates Amendment A1: 2009; Incorporating corrigendum February 2010)
- EN 60529:1991 Degrees of Protection Provided by Enclosures (IP Code) (Incorporates Amendments A1: 2000 and A2: 2013)
- EN 61496-1:2004 Safety of machinery ?Electro-sensitive protective equipment Part 1: General requirements and tests Incorporates Amendment A1: 2008; Incorporating corrigendum February 2010
- EN 840-1:2012 Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design*， 2024-04-20 Update
- EN 840-2:2012 Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s)@ for trunnion and/or comb lifting devices - Dimensions and design*， 2024-04-20 Update
- EN 840-3:2012 Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design*， 2024-04-20 Update
- EN 840-4:2012 Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design*， 2024-04-20 Update
EN 16486:2014 history
- 2018 EN 16486:2014/PRA1:2018 Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements
- 2014 EN 16486:2014 Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements
