This European Standard, together with part 1, deals with all significant hazards for jetting, grouting and injection equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014 This document does not repeat the requirements from EN 16228-1:2014, but adds or replaces the requirements for application for jetting, grouting and injection equipment. Rigs for drilling, vibrating, pile driving, to be used for preparing holes for these applications are covered by EN 16228-2:2014 and/or EN 16228-4:2014. Jetting, grouting and injection equipment is used in the preparation, transfer and application of grouting materials used for either:- the improvement of ground condition; or; - the filling of voids e. g. around piles or ground anchors. Jetting, grouting and injection equipment are constituted by all equipment and installations, operated by hand or electrically, pneumatically, mechanically or hydraulically powered, necessary for the following; - mixing, storing, measuring and pumping of substances (cement suspension, mortar or chemical liquids/mixtures); - jetting, grouting and injection processes (of/into subsoil) with low, medium or high pressure or vacuum systems; - all types of pressure and wear resistant grout hoses, fittings, quick release coupling with thread or hose connection, ball valves and flexible pipes; - all control systems, electrical or mechanical pressure and flow recorders, for monitoring the grouting; - all jetting, grouting and injection accessories, such as: special tools, lances, rods, sockets, packers, retention clamps and swivel hooks.
EN 16228-6:2014 Referenced Document
EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar - Safety requirements
EN 12151:2007 Machinery and plants for the preparation of concrete and mortar - Safety requirements*， 2024-04-20 Update
EN 16228-1:2014 Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 16228-2:2014 Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering@ quarrying and mining
EN 16228-4:2014 Drilling and foundation equipment - Safety - Part 4: Foundation equipment
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)*， 2024-04-20 Update
EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components
EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components
prEN 855-2011 Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification
EN 16228-6:2014 history
2021EN 16228-6:2014/FprA1:2021 Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
2021EN 16228-6:2014+A1:2021 Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment
2019EN 16228-6:2014/PRA1:2019 Drilling and foundation equipment - Safety - Part 6: Jetting@ grouting and injection equipment
2014EN 16228-6:2014 Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment