This European Standard specifies the requirements for factory made products of extruded polystyrene foam, with or without facings or coatings, which are used for thermal insulation of buildings. The products are manufactured in the form of boards which are also available with special edge and surface treatment (tongue & grooves, shiplap etc.). Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. The standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,25 m2K/W or a declared thermal conductivity greater than 0,060 W/(mK) at 10 °C are not covered by this standard. This standard does not cover in situ insulation products, nor products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14307), or civil engineering applications (covered by EN 14934).
EN 13164:2012+A1:2015 Referenced Document
ASTM D3985-05 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor*， 2024-04-20 Update
EN 12086:1997 Thermal Insulating Products for Building Applications - Determination of Water Vapour Transmission Properties
EN 12087:2013 Thermal insulating products for building applications - Determination of long term water absorption by immersion
EN 12088:2013 Thermal insulating products for building applications - Determination of long term water absorption by diffusion
EN 12089:2013 Thermal insulating products for building applications - Determination of bending behaviour
EN 12090:2013 Thermal insulating products for building applications - Determination of shear behaviour
EN 12091:2013 Thermal insulating products for building applications - Determination of freeze-thaw resistance
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 12939:2000 Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Thick Products of High and Medium Thermal Resistance*， 2024-04-20 Update
EN 13172:2012 Thermal insulation products - Evaluation of conformity
EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
EN 1605:2013 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
EN 1606:2013 Thermal insulating products for building applications - Determination of compressive creep
EN 1607:2013 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
EN 822:2013 Thermal insulating products for building applications - Determination of length and width
EN 823:2013 Thermal insulating products for building applications - Determination of thickness
EN 824:2013 Thermal insulating products for building applications - Determination of squareness
EN 825:2013 Thermal insulating products for building applications - Determination of flatness
EN 826:2013 Thermal insulating products for building applications - Determination of compression behaviour
EN 13164:2012+A1:2015 history
2018EN 13164:2012/PRA2:2018 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification
2015EN 13164:2012+A1:2015 Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification
2008EN 13164:2008 Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
2001EN 13164:2001 Thermal insulation products for buildings ?Factory made products of extruded polystyrene foam (XPS) ?Specification Including Corrigendum December 2005; Incorporates Amendment A1:2004