This European Standard specifies the requirements for factory made phenolic foam products, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards and laminates. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,40 m2 K/W or a declared thermal conductivity greater than 0,050 W/(mK) at 10 °C are not covered by this standard. This standard does not cover in-situ thermal insulation products, products intended to be used for the thermal insulation of building equipment and industrial installations (covered by EN 14314).
EN 13166:2012+A1:2015 Referenced Document
ASTM D3985-05 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor*, 2024-04-20 Update
EN 12086:1997 Thermal Insulating Products for Building Applications - Determination of Water Vapour Transmission Properties
EN 12087:2013 Thermal insulating products for building applications - Determination of long term water absorption by immersion
EN 12089:1997 Thermal Insulating Products for Building Applications - Determination of Bending Behaviour
EN 12090:2013 Thermal insulating products for building applications - Determination of shear behaviour
EN 12429:1998 Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
EN 12939:2000 Thermal Performance of Building Materials and Products - Determination of Thermal Resistance by Means of Guarded Hot Plate and Heat Flow Meter Methods - Thick Products of High and Medium Thermal Resistance*, 2024-04-20 Update
EN 1602:2013 Thermal insulating products for building applications - Determination of the apparent density
EN 1603:2013 Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 �� 50 % relative humidity)
EN 1604:2013 Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
EN 1606:2013 Thermal insulating products for building applications - Determination of compressive creep
EN 1607:2013 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
EN 1609:2013 Thermal insulating products for building applications - Determination of short term water absorption by partial immersion
EN 822:2013 Thermal insulating products for building applications - Determination of length and width
EN 823:2013 Thermal insulating products for building applications - Determination of thickness
EN 824:2013 Thermal insulating products for building applications - Determination of squareness
EN 825:2013 Thermal insulating products for building applications - Determination of flatness
EN 826:2013 Thermal insulating products for building applications - Determination of compression behaviour
EN 13166:2012+A1:2015 history
2018EN 13166:2012/PRA3:2018 Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification
2016EN 13166:2012+A2:2016 Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification
2015EN 13166:2012+A1:2015 Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification
2012EN 13166:2012 Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification (Incorporates Amendment A1: 2015)
2008EN 13166:2008 Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
2001EN 13166:2001 Thermal insulation products for buildings Factory made products of phenolic foam (PF) Specification Includes amendment A1: 2004; Including corrigendum December 2005