ASTM A849-15
Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- Standard No.
- ASTM A849-15
- Release Date
- 2015
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM A849-15(2021)
- Latest
- ASTM A849-15(2021)
- Scope
1.1 This specification covers post-applied coatings, pavings, and linings for corrugated steel pipe and corrugated steel structural plate pipe, pipe-arches, and arches coated, paved, or lined with specified materials over either metallic coatings or metallic coatings with polymer coatings. This specification includes asphalt, polymerized asphalt, polymer, mastic, and emulsion coatings and asphalt and concrete pavements and linings applied to the pipe in the producing plant, as well as, asphalt and mastic coatings applied in the field. Field-applied concrete pavements and linings are covered by Specification A979/A979M. The pipe to which the coatings are applied is described in Specifications A760/A760M, A761/A761M, and A762/A762M.
1.2 There is no cleaning operation currently included in pipe coating practice. However, experience has shown that a clean substrate provides good adherence for both cold- and hot-applied post coatings. The performance of post coating or lining, or both, will depend on the surface cleanliness over which it is applied.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in brackets are for information only.
1.4 The following safety hazards caveat pertains only to the test methods portions, Sections 11 and 12, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM A849-15 Referenced Document
- ASTM A185/A185M Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
- ASTM A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- ASTM A742/A742M Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
- ASTM A760/A760M Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- ASTM A761/A761M Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
- ASTM A762/A762M Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
- ASTM A862/A862M Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
- ASTM A926 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
- ASTM A979/A979M Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
- ASTM C150 Standard Specification for Portland Cement
- ASTM C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
- ASTM C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field
- ASTM C33 Standard Specification for Concrete Aggregates
- ASTM C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- ASTM C595 Standard Specification for Blended Hydraulic Cements
- ASTM C618 Standard Specification for Fly Ash And Raw Or Calcined Natural Pozzolan For Use As A Mineral Admixture In Portland Cement Concrete
- ASTM C670 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
- ASTM D1005 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
- ASTM D1187 Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
- ASTM D2042 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
- ASTM D36 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- ASTM D4402 Standard Test Method for Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
- ASTM D5 Standard Test Method for Penetration of Bituminous Materials
- ASTM D6 Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
- ASTM D70 Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
- ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
ASTM A849-15 history
- 2021 ASTM A849-15(2021) Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- 2015 ASTM A849-15 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- 2010 ASTM A849-10 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- 2000 ASTM A849-00(2005) Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- 2000 ASTM A849-00 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
