ISO 4254-7:2017
Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters
- Standard No.
- ISO 4254-7:2017
- Release Date
- 2017
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 4254-7:2017/Amd 1:2019
- Latest
- ISO 4254-7:2017/Amd 1:2019
- Scope
- This document, when used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. When provisions of this document are different from those which are stated in ISO 4254-1, the provisions of this document take precedence over the provisions of ISO 4254-1 for machines that have been designed and built according to the provisions of this document. This document, taken together with ISO 4254-1, deals with all the significant hazards (as listed in Table A.1), hazardous situations and events relevant to combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters, when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer (see Annex A). It is not applicable to hazards arising from the presence of persons other than the operator, cleaning of the grain tank, and hazards related to vibrations and moving parts for power transmission, except for strength requirements for guards and barriers. In respect of braking and steering, it is applicable only to the ergonomic aspects (e.g. location of brake pedal and steering wheel); no other aspects related to braking and steering are covered. In the case of trailed harvesters, it is applicable only to hazards related to the working process. Design requirements for roll-over protective structures (if applicable) are not specified in this document. Performance levels (or categories) for safety-related parts of control systems in accordance with NOTE Specific requirements related to road traffic regulations are not taken into account in this document. This document is not applicable to machines manufactured before the date of its publication.
ISO 4254-7:2017 Referenced Document
- ISO 10975:2009 Tractors and machinery for agriculture - Auto-guidance systems for operator-controlled tractors and self-propelled machines - Safety requirements
- ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Safety signs and hazard pictorials - General principles
- ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction
- ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
- ISO 15077:2008 Tractors and self-propelled machinery for agriculture - Operator controls - Actuating forces, displacement, location and method of operation
- ISO 25119-1:2010 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development
- ISO 3600:2015 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format
- ISO 3767-1:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 1: Common symbols
- ISO 3767-2:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery
- ISO 3776-1:2006 Tractors and machinery for agriculture - Seat belts - Part 1: Anchorage location requirements
- ISO 3776-2:2013 Tractors and machinery for agriculture - Seat belts - Part 2: Anchorage strength requirements
- ISO 3776-3:2009 Tractors and machinery for agriculture - Seat belts - Part 3: Requirements for assemblies
- ISO 4254-1:2013 Agricultural machinery-Safety-Part 1:General requirements.*， 2024-04-20 Update
- ISO 5131:2015 Tractors for agriculture and forestry — Measurement of noise at the operator's position — Survey method
- ISO 5353:1995 Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point
- ISO 5687:1999 Equipment for harvesting - Combine harvesters - Determination and designation of grain tank capacity and unloading device performance
- ISO 8909-1:1994 Forage harvesters; part 1: vocabulary
- ISO 9533:2010 Earth-moving machinery - Machine-mounted audible travel alarms and forward horns - Test methods and performance criteria
ISO 4254-7:2017 history
- 2019 ISO 4254-7:2017/Amd 1:2019 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters
- 2017 ISO 4254-7:2017 Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters
- 2008 ISO 4254-7:2008 Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters
- 1995 ISO 4254-7:1995 Tractors and machinery for agriculture and forestry - Technical means for ensuring safety - Part 7: Combine harvesters, forage and cotton harvesters
