ISO 1825:2017
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification

Standard No.

ISO 1825:2017

Release Date

2017

Published By

International Organization for Standardization (ISO)

Latest

ISO 1825:2017

Scope

This document specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling of aircraft. All four types are designed for: a) use with petroleum fuels having an aromatic-hydrocarbon content not exceeding 30 % by volume; c) operation at up to 2,0 MPa (20 bar) maximum working pressure, including surges of pressure which the hose can be subjected to in service. b) operation within the temperature range of −30 °C to +65 °C and such that they will be undamaged by climatic conditions of −40 °C to +70 °C when stored in static conditions; NOTE 1 Type C hoses are intended for general pressure applications on all vehicles used for plane fuelling. They can also be used for vehicle/rail car loading and discharge where excessive vacuum does not occur. NOTE 2 Type F hoses can be used for plane delivery applications on vehicles that are also used for defuelling at high flow rates where type C hoses are not suitable. NOTE 3 Type E and F hoses can also be used for vehicle/rail car loading and discharge, for trailer to fueller transfer and for elevation platform supply (riser) to provide greater kink resistance.

ISO 1825:2017 Referenced Document

• ISO 10619-2:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures
• ISO 1382:2012 Rubber - Vocabulary
• ISO 1402:2009 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
• ISO 1817:2015 "Rubber, vulcanized or thermoplastic - Determination of the effect of liquids"
• ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
• ISO 2230:2002 Rubber products - Guidelines for storage
• ISO 37:2011 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
• ISO 4649:2010 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device
• ISO 4671:2007 Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
• ISO 6246:2017 Petroleum products - Gum content of fuels - Jet evaporation method
• ISO 7326:2016 Rubber and plastics hoses - Assessment of ozone resistance under static conditions
• ISO 7989-1:2006 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles
• ISO 7989-2:2007 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc-alloy coating
• ISO 8031:2009 Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity
• ISO 8033:2016 Rubber and plastics hoses - Determination of adhesion between components
• ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary

ISO 1825:2017 history

• 2017 ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification
• 2010 ISO 1825:2010 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification
• 1996 ISO 1825:1996 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification
• 1975 ISO 1825:1975 Rubber hoses for aircraft ground fuelling without static conducting wire