DIN EN 13445-6:2017 PDF

Standard No.: DIN EN 13445-6:2017
Release Date: 2017
Published By: German Institute for Standardization
Status: Be replaced
Replace By: DIN EN 13445-6:2018
Latest: DIN EN 13445-6:2021; DIN EN 13445-6:2018; DIN EN 13445-6:2021-12
Replace: DIN EN 13445-6:2016

Scope: This Part of the European Standard EN 13445 specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less than 100 bar and shell wall thicknesses not exceeding 60 mm, which are constructed of ferritic or austenitic spheroidal graphite cast iron. The thickness limitation of the shell does not apply to thickness of flanges, reinforcements, bosses etc. The allowable grades do not include lamellar graphite cast iron grades for ferritic and austenitic grades, which are explicitly excluded from this European Standard because of low elongation and brittle material behaviour, which requires the use of different safety factors and a different approach.

DIN EN 13445-6:2017 Referenced Document

EN 1011-8:2004 Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons*， 2024-04-20 Update
EN 12680-3:2011 Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings*， 2024-04-20 Update
EN 12681:2003 Founding - Radiographic examination
EN 13068-1:1999 Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties
EN 13068-2:1999 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices
EN 13445-1:2014 Unfired pressure vessels - Part 1: General (Incorporates Amendment A2: 2018)
EN 13445-3:2014 Unfired pressure vessels - Part 3: Design
EN 13445-5:2014 Unfired pressure vessels - Part 5: Inspection and testing
EN 1369:2012 Founding - Magnetic particle testing*， 2024-04-20 Update
EN 1370:2011 Founding - Examination of surface condition*， 2024-04-20 Update
EN 1371-1:2011 Founding - Liquid penetrant testing - Part 1: Sand, gravity die and low pressure die castings*， 2024-04-20 Update
EN 13835:2012 Founding - Austenitic cast irons
EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
EN 1559-3:2011 Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings*， 2024-04-20 Update
EN 1563:2011 Founding - Spheroidal graphite cast irons*， 2024-04-20 Update
EN 287-6:2010 Qualification test of welders - Fusion welding - Part 6: Cast iron
EN 764-2:2012 Pressure equipment - Part 2: Quantities, symbols and units
EN 764-5:2002 Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials*， 2024-04-20 Update
EN 837-1:1996 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
EN 837-3:1996 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
EN ISO 15614-3:2008 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons
EN ISO 8062-1:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007)
EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
EN ISO 945-1:2008 Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2008)*， 2024-04-20 Update
ISO 1083:2004 Spheroidal graphite cast irons - Classification
ISO 12107:2012 Metallic materials - Fatigue testing - Statistical planning and analysis of data

DIN EN 13445-6:2017 history

2021 DIN EN 13445-6:2021 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2021
2019 DIN EN 13445-6/A2:2019 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron (includes Amendment A2:2018)
2018 DIN EN 13445-6:2018 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2014
2017 DIN EN 13445-6:2017 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2014
2016 DIN EN 13445-6:2016 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2014
2015 DIN EN 13445-6:2015 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2014
2014 DIN EN 13445-6:2014 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2014
2013 DIN EN 13445-6:2013 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2009
2012 DIN EN 13445-6:2012 Unfired pressure vessels .Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2009
0000 DIN EN 13445-6:2011
2010 DIN EN 13445-6:2010 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2009
2009 DIN EN 13445-6/A3:2009 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2002/A3:2008
2007 DIN EN 13445-6/A2:2007 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2002/A2:2006
2004 DIN EN 13445-6/A1:2004 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheriodal graphite cast iron; German version EN 13445-6:2002/A1:2004
1970 DIN EN 13445-6 A1 E:2002-08
1970 DIN EN 13445-6:2002 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron

Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2014

DIN EN 13445-6:2017Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2014

DIN EN 13445-6:2017 Referenced Document

DIN EN 13445-6:2017 history

DIN EN 13445-6:2017
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2014