DIN EN ISO 14246:2017
Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO 14246:2014 + Amd.1:2017); German version EN ISO 14246:2014 + A1:2017

Standard No.

DIN EN ISO 14246:2017

Release Date

2017

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN EN ISO 14246 E:2021

Latest

DIN EN ISO 14246:2022-05

Replace

DIN EN ISO 14246:2014 DIN EN ISO 14246/A1:2016

Scope

This International Standard describes the procedures and acceptance criteria for manufacturing testing and examination (sometimes called initial inspection and tests) of cylinder valves that have been manufactured according to type approvals. This International Standard is applicable to a)cylinder valves intended to be fitted to refillable transportable gas cylinders, b)main valves (excluding ball valves) for cylinder bundles, and c)cylinder valves or main valves with integrated pressure regulator (VIPR) designed and type tested according to ISO 10297. NOTE Where there is no risk of ambiguity, cylinder valves, main valves and VIPR are addressed with the collective term (valves) within this document. The principles of these tests and examinations can be beneficially applied to cylinder valves type tested to national or International Standards other than ISO 10297.

DIN EN ISO 14246:2017 Referenced Document

• DIN EN ISO 10156:2011 Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets (ISO 10156:2010 + Cor 1:2010); German version EN ISO 10156:2010 + AC:2010
• DIN EN ISO 10286:2015 Gas cylinders - Terminology (ISO 10286:2015); Trilingual version EN ISO 10286:2015
• DIN EN ISO 10297:2014 Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014); German version EN ISO 10297:2014
• DIN EN ISO 15001:2012 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010); German version EN ISO 15001:2011
• DIN ISO 2859-10:2009 Sampling procedures for inspection by attributes - Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes (ISO 2859-10:2006); Text in German and English
• DIN ISO 2859-1:2014 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 + Cor. 1:2001 + Amd.1:2011); Text in German and English
• DIN ISO 2859-2:1993 Sampling procedures for inspection by attributes; sampling plans indexed by limiting quality (LQ) for isolated lot inspection; identical with ISO 2859-2:1985
• DIN ISO 2859-3:2007 Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures (ISO 2859-3:2005); Text in German, English
• DIN ISO 2859-4:2005 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels (ISO 2859-4:2002)
• ISO 10156:2017 Gas cylinders - Gases and gas mixtures - Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
• ISO 10286:2015 Gas cylinders - Terminology
• ISO 10297:2014 Gas cylinders - Cylinder valves - Specification and type testing
• ISO 15001:2010 Anaesthetic and respiratory equipment - Compatibility with oxygen
• ISO 2859-10:2006 Sampling procedures for inspection by attributes - Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
• ISO 2859-1:1999 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• ISO 2859-2:1985 Sampling procedures for inspection by attributes; Part 2 : Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
• ISO 2859-3:2005 Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures
• ISO 2859-4:2002 Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
• ISO 2859-5:2005 Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection

DIN EN ISO 14246:2017 history

• 2022 DIN EN ISO 14246:2022-05 Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO 14246:2022); German version EN ISO 14246:2022
• 1970 DIN EN ISO 14246 E:2021-05 Gas cylinder and cylinder valve production testing and inspection (draft)
• 2021 DIN EN ISO 14246 E:2021 Draft Document - Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO/DIS 14246:2021); German and English version prEN ISO 14246:2021
• 2017 DIN EN ISO 14246:2017 Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO 14246:2014 + Amd.1:2017); German version EN ISO 14246:2014 + A1:2017
• 2014 DIN EN ISO 14246:2014 Gas cylinders - Cylinder valves - Manufacturing tests and examinations (ISO 14246:2014); German version EN ISO 14246:2014
• 2001 DIN EN ISO 14246:2001 Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001); German version EN ISO 14246:2001
• 0000 DIN EN ISO 14246:1997