IEC 61347-1:2017
Lamp controlgear - Part 1: General and safety requirements

Standard No.
IEC 61347-1:2017
Release Date
2017
Published By
International Electrotechnical Commission (IEC)
Status
 2017-10
Replace By
IEC 61347-1:2015/AMD1:2017
Latest
IEC 61347-1:2015/AMD1:2017
Scope
This part of IEC 61347 specifies general and safety requirements for lamp controlgear for use on d.c. supplies up to 2501000 V and/or a.c. supplies up to 1000 V at 50 Hz or 60 Hz. This standard also covers lamp controlgear for lamps which are not yet standardized. Tests dealt with in this standard are type tests. Requirements for testing individual lamp controlgear during production are not included. Requirements for semi-luminaires are given in IEC 60598-1:2014 (see definition 0). Particular requirements for controlgears providing safety extra low voltage (from now on SELV) are given in Annex L. It can be expected that lamp control gear which comply with this standard will not compromise safety between 90 % and 110 % of their rated supply voltage in independent use and when operated in luminaires complying with the safety standard IEC 60598-1 and the relevant part IEC 60598-2-xx and with lamps complying with the relevant lamp standards. Performance requirements may require tighter limits.

IEC 61347-1:2017 Referenced Document

  • IEC 60065:2014 Audio, video and similar electronic apparatus - Safety-requirements
  • IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
  • IEC 60081:1997 Double-capped fluorescent lamps - Performance specifications
  • IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
  • IEC 60112:2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
  • IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
  • IEC 60216-2:2005 Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
  • IEC 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
  • IEC 60216-4-1:2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
  • IEC 60216-4-2:2000 Electrical insulating materials - Thermal endurance porperties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 °C
  • IEC 60216-4-3:2000 Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
  • IEC 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
  • IEC 60216-8:2013 Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures
  • IEC 60317-0-1:2013 Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
  • IEC 60384-14:2013 Fixed capacitors for use in electronic equipment. Part 14: Sectional specification.Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
  • IEC 60417-DB:2002 Graphical symbols for use on equipment
  • IEC 60449:1973 Voltage bands for electrical installiatons of buildings
  • IEC 60529:1989 Degrees of protection provided by enclosures (IP code)
  • IEC 60598-1:2014 Luminaires - Part 1: General requirements and tests
  • IEC 60598-2-1:1979 Luminaires. Part 2 : Particular requirements. Fixed general purpose luminaires*Requirement
  • IEC 60598-2-2:2011 Luminaires - Part 2: Particular requirements - Recessed luminaires

IEC 61347-1:2017 history

Lamp controlgear - Part 1: General and safety requirements


Copyright ©2024 All Rights Reserved