IEC 61084-2-4:2017 PDF

Scope: This part of the IEC 61084 series specifies requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary for the electrically protective separation, of insulated conductors, cables and possibly other electrical equipment in electrical and/or communication systems installations. The maximum voltage of these installations is 1000 V AC and 1500 V DC Service poles and service posts are intended to be mounted in free space and in contact with mounting surface(s) only at one or two ends, where the word "mounted" means fixed or placed on the floor with a weighted base or linked to a mounting surface through a flexible component. NOTE Service poles and service posts can also be part of a CTS/CDS intended for wall or ceiling mounting covered by IEC 61084-2-1 or floor mounting covered by IEC 61084-2-2 and are then also tested according to said parts, as appropriate. This international standard does not apply to conduit systems, cable tray systems, cable ladder systems, powertrack systems or equipment covered by other standards.

IEC 61084-2-4:2017 Referenced Document

IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
IEC 60228:2004 Conductors of insulated cables
IEC 61084-1:2017 Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements
IEC 61084-2-1:2017 Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings
IEC 61084-2-2:2017 Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor
ISO 535:2014 Paper and board - Determination of water absorptiveness - Cobb method
ISO 536:2012 Paper and board - Determination of grammage
ISO 9328-7:2011 Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels

0000 IEC 61084-2-4:2017/AMD1:2024 CSV
2024 IEC 61084-2-4:2024 Cable trunking systems and cable ducting systems for electrical installations – Part 2-4: Particular requirements – Service poles and service posts
2017 IEC 61084-2-4:2017 Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts
1996 IEC 61084-2-4:1996 Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements - Section 4: Service poles