International Organization for Standardization (ISO)
Latest
ISO 3580:2017
Scope
This document specifies requirements for classification of covered electrodes, based on the all-weld metal in the heat-treated condition, for manual metal arc welding of ferritic and martensitic creepresisting and low alloy elevated temperature steels.
This document is a combined specification for classification utilizing a system based upon the chemical composition of the all-weld metal, with requirements for the yield strength and impact energy of the all-weld metal, or utilizing a system based upon the tensile strength and the chemical composition of the all-weld metal.
a) Paragraphs and tables which carry the suffix letter “A” are applicable only to electrodes classified to the system based upon chemical composition, with requirements for the yield strength and impact energy of the all-weld metal under this document.
b) Paragraphs and tables which carry the suffix letter “B” are applicable only to electrodes classified to the system based upon the tensile strength and the chemical composition of all-weld metal under this document.
c) Paragraphs and tables which do not have either the suffix letter “A” or the suffix letter “B” are applicable to all covered electrodes classified under this document.
For comparison purposes, some tables include requirements for electrodes classified according to both systems, placing individual electrodes from the two systems, which are similar in composition and properties, on adjacent lines in the particular table. In a particular line of the table that is mandatory in one system, the symbol for the similar electrode from the other system is indicated in parentheses. By appropriate restriction of the formulation of a particular electrode, it is often, but not always, possible to produce an electrode that can be classified in both systems, in which case the electrode, and/or its packaging, can be marked with the classification in either or both systems.
ISO 3580:2017 Referenced Document
EN 1599:1997 Welding Consumables - Covered Electrodes for Manual Metal Arc Welding of Creep-Resisting Steels - Classification
ISO 13916:1996 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature
ISO 14344:2010 Welding consumables - Procurement of filler materials and fluxes
ISO 15792-1:2000 Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys
ISO 15792-3:2011 Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld
ISO 2401:1972 Covered electrodes; Determination of the efficiency, metal recovery and deposition coefficient
ISO 3690:2012 Welding and allied processes - Determination of hydrogen content in arc weld metal
ISO 544:2011 Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings
ISO 6847:2013 Welding consumables - Deposition of a weld metal pad for chemical analysis
ISO 6947:2011 Welding and allied processes - Welding positions