ISO 18243:2017
Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems
- Standard No.
- ISO 18243:2017
- Release Date
- 2017
- Published By
- International Organization for Standardization (ISO)
- Status
- Replace By
- ISO 18243:2017/Amd 1:2020
- Latest
- ISO 18243:2017/Amd 1:2020
- Scope
- This document specifies the test procedures for lithium-ion battery packs and systems used in electrically propelled mopeds and motorcycles. The specified test procedures enable the user of this document to determine the essential characteristics on performance, safety and reliability of lithium-ion battery packs and systems. The user is also supported to compare the test results achieved for different battery packs or systems. This document enables setting up a dedicated test plan for an individual battery pack or system subject to an agreement between customer and supplier. If required, the relevant test procedures and/or test conditions of lithium-ion battery packs and systems are selected from the standard tests provided in this document to configure a dedicated test plan. NOTE 1 Electrically power-assisted cycles (EPAC) cannot be considered as mopeds. The definition of electrically power-assisted cycles can differ from country to country. An example of definition can be found in the EU Directive 2002/24/EC. NOTE 2 Testing on cell level is specified in IEC 62660 (all parts).
ISO 18243:2017 Referenced Document
- IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- IEC 60068-2-47:2005 Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
- IEC 60068-2-52:1996 Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
- IEC 62660-1:2010 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 1: Performance testing
- IEC 62660-2:2010 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing
- IEC 62660-3:2016 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements
- ISO 12405-1:2011 Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 1: High-power applications
- ISO 12405-2:2012 Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 2: High-energy applications
- ISO 12405-3:2014 Electrically propelled road vehicles - Test specification for lithium-ion traction battery packs and systems - Part 3: Safety performance requirements
- ISO 13063:2012 Electrically propelled mopeds and motorcycles - Safety specifications
- ISO 16750-1:2006 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 1: General
- ISO 16750-4:2010 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
- ISO 20653:2013 Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access
- ISO 23274:2007 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles
- ISO 23828:2013 Fuel cell road vehicles.Energy consumption measurement.Vehicles fuelled with compressed hydrogen
- ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
- ISO 6469-1:2009 Electrically propelled road vehicles - Safety specifications - Part 1: On-board rechargeable energy storage system (RESS)
- ISO 6469-3:2011 Electrically propelled road vehicles - Safety specifications - Part 3: Protection of persons against electric shock
- ISO/TR 8713:2012 Electrically propelled road vehicles - Vocabulary
ISO 18243:2017 history
- 2020 ISO 18243:2017/Amd 1:2020 Electrically propelled mopeds and motorcycles — Test specifications and safety requirements for lithium-ion battery systems — Amendment 1
- 2017 ISO 18243:2017 Electrically propelled mopeds and motorcycles - Test specifications and safety requirements for lithium-ion battery systems
