This document specifies the performance requirements for cathodic corrosion protection of steel in cement-based concrete in both new and existing structures. It includes the air-exposed parts of buildings and civil structures, including non-prestressed and prestressed reinforcement embedded in concrete. It can be used on uncoated and organically coated reinforcing steel. This document is applicable to steel embedded in parts of buildings or structures exposed to air, buried, submerged, or influenced by tides. NOTE 1 Annex A provides an overview of the principles of cathodic corrosion protection and its application to steel in concrete. NOTE 2 This document, although not specifically intended for the cathodic protection of steel in any electrolyte other than concrete, may be used for the cathodic protection of steel in other cementitious materials such as: B. can be found in masonry used in steel frames, building stones and terracotta-clad buildings from the early 20th century. Such applications require additional considerations for these structures in terms of design, materials and installation of cathodic protection; However, the requirements of this document can be applied to these structures.
EN ISO 12696:2016 Referenced Document
ASTM B338-14 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers*, 2024-04-20 Update
ASTM C876-15 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete*, 2024-04-20 Update
EN 12473:2014 General principles of cathodic protection in seawater
EN 12474:2001 Cathodic protection of submarine pipelines
EN 12495:2000 Cathodic protection for fixed steel offshore structures
EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
EN 12954:2001 Cathodic Protection of Buried or Immersed Metallic Structures - General Principles and Application for Pipelines
EN 13509:2003 Cathodic protection measurement techniques
EN 14629:2007 Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete
EN 14630:2006 Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method*, 2024-04-20 Update
EN 1504-10:2003 Products and systems for the protection and repair of concrete structures Definitions Requirements Quality control and evaluation of conformity Part 10: Site application of products and systems and quality control of the works (Incorporating Corrigend*, 2024-04-20 Update
EN 1504-1:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete*, 2024-04-20 Update
EN 1504-3:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair*, 2024-04-20 Update
EN 1504-4:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding*, 2024-04-20 Update
EN 1504-5:2013 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection
EN 1504-6:2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar
EN 1504-7:2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
EN 1504-8:2016 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP)
EN 1504-9:2008 Products and systems for the protection and repair of concrete structures - Definitions@ requirements@ quality control and evaluation of conformity - Part 9: General principles for the use of products and systems
EN 15257:2006 Cathodic protection - Competence levels and certification of cathodic protection personnel*, 2024-04-20 Update
IEC 60502-1:2004 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<(Index)m> = 1,2 kV) up to 30 kV (U<(Index)m> = 36 kV) - Part 1: Cables for rated voltages of 1 kV (U<(Index)m> = 1,2 kV) and 3 kV (U<(Index)m> = 3,6 kV)
IEC 60529:1989 Degrees of protection provided by enclosures (IP code)
IEC 61140:2016 Protection against electric shock - Common aspects for installations and equipment
IEC 61558-1:2005 Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
IEC 61558-2 Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps
IEC 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications
IEC 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporationg control transformers
IEC 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
EN ISO 12696:2016 history
2022EN ISO 12696:2022 Cathodic protection of steel in concrete (ISO 12696:2022)