To ensure safety and interoperability, this Standard gives: the limits for in-service and off-vehicle wheelsets; the operations to be carried out for which the specific values (and/or criteria) remain to be defined in the maintenance plan. This European Standard applies to wheelsets and axle boxes complying with the following European Standards: EN 13103, EN 13104; EN 13260, EN 13261, EN 13262; EN 13979-1; EN 13715; EN 13749. that comprise: the axle fitted with wheels of diameters greater than or equal to 330 mm; axle boxes with bearings and grease. This European Standard is also applicable to wheelsets: fitted with brake discs, final drive, transmission or noise-damping systems, as appropriate; not complying with the above European Standards, but complying with the international requirements in force, for example in UIC leaflets, before the approval of these standards; with tyred wheels; with resilient wheels. For equipment not covered by Directive 2008/57/EC, this European Standard may be applied, noting that different values may be used. All dimensions in this Standard are in millimetres (mm). It is necessary to describe in a specific document the tasks to be performed in order to maintain wheelsets within the limits defined therein. NOTE The specific values and criteria are defined in an appropriate maintenance plan.
EN 15313:2016 Referenced Document
BS 5892-5 Railway rolling stock material (metric). Specification for steel bars for retaining rings for tyred wheels
EN 15085-3:2007 Railway applications - Welding of railway vehicles and components - Part 3: Design requirements*， 2024-04-20 Update
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
EN ISO 9934-1:2015 Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2015)
EN ISO 9934-2:2015 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015)
EN ISO 9934-3:2015 Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015)