This European Standard identifies material independent performance characteristics, except resistance to fire and smoke control characteristics, that are applicable to windows (including roof windows, roof windows with external fire resistance and door height windows), external pedestrian doorsets (and their assemblies, including unframed glass doorsets, escape route doorsets) and screens. Fire resisting and/or smoke control characteristics for pedestrian doorsets and openable windows are covered by EN 16034. This European Standard applies to: a) fixed windows or fixed lights, manually or power operated windows and door height windows, and screens for installation in vertical wall apertures and roof windows for installation in roofs, complete with: 1) related hardware, if any; 2) weather stripping, if any; 3) glazed apertures when intended to have glazed apertures; 4) with or without incorporated shutters and/or shutter boxes and/or blinds; and manually or power operated windows, roof windows, door height windows and screens that are: 5) fully or partially glazed including any non-transparent infill; 6) fixed or partly fixed or openable with one or more casements/sashes (e. g. hinged, projecting, pivoted, sliding); b) manually operated external pedestrian doorsets with flush or panelled leaves, complete with: 1) integral fanlights, if any; 2) adjacent parts that are contained within a single frame for inclusion in a single aperture, if any. The windows covered by this standard are not assessed regarding their ability to release (to open). The products covered by this European Standard are not assessed for structural applications. This European Standard does not apply to:- rooflights according to EN 1873 and EN 14963; - curtain walling according to EN 13830; - industrial, commercial and garage doors and gates according to EN 13241; - internal pedestrian doorsets according to prEN 14351-2; - revolving doorsets; - power operated pedestrian doorsets according to EN 16361; - windows intended to be part of internal partition.
EN 14351-1:2006+A2:2016 Referenced Document
EN 1026:2016 Windows and doors - Air permeability - Test method
EN 1027:2016 Windows and doors - Water tightness - Test method
EN 1096-4:2004 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 1121:2000 Doors - Behaviour between two different climates - Test method
EN 1125:2008 Building hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
EN 1191:2012 Windows and doors - Resistance to repeated opening and closing - Test method*， 2024-04-20 Update
EN 1192:1999 Doors - Classification of Strength Requirements
EN 12046-1:2003 Operating forces - Test method - Part 1: Windows*， 2024-04-20 Update
EN 12046-2:2000 Operating forces - Test method - Part 2: Doors
EN 12150-2:2004 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Products standard*， 2024-04-20 Update
EN 12207:1999 Windows and Doors - Air Permeability - Classification
EN 12208:1999 Windows and Doors - Watertightness - Classification (Incorporating Corrigendum June 2000)
EN 12210:2016 Windows and doors - Resistance to wind load - Classification
EN 12211:2016 Windows and doors - Resistance to wind load - Test method
EN 12217:2015 Doors - Operating forces - Requirements and classification
EN 1279-5:2005 Glass in building - Insulating glass units Part 5: Evaluation of conformity (Incorporates Amendment A2: 2010)
EN 1522:1998 Windows, Doors, Shutters and Blinds - Bullet Resistance - Requirements and Classification Ratified European Text
EN 1523:1998 Windows, doors, shutters and blinds - Bullet resistance - Test method
EN 1748-1-2:2004 Glass in building - Special basic products - Part 1-2: Borosilicate glasses; Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 1748-2-2:2004 Glass in building - Special basic product - Part 2-2: Glass ceramics - Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 179:2008 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
EN 1863-2:2004 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 1873:2014 Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test (Incorporates Amendment A1:2016)
EN 1935:2002 Building Hardware - Single-Axis Hinges - Requirements and Test Methods
EN 410:2011 Glass in building - Determination of luminous and solar characteristics of glazing
EN 572-9:2004 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 673:2011 Glass in building - Determination of thermal transmittance (U value) - Calculation method
EN 947:1998 Hinged or pivoted doors - Determination of the resistance to vertical load
EN 948:1999 Hinged or Pivoted Doors - Determination of the Resistance to Static Torsion
EN 949:1998 Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors
EN 950:1999 Door leaves - Determination of the resistance to hard body impact
EN 14351-1:2006+A2:2016 history
2016EN 14351-1:2006+A2:2016 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
2010EN 14351-1:2006+A1:2010 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
2006EN 14351-1:2006 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics (Incorporates Amendment A1: 2010)