EN 12312-6:2017
Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment

Standard No.
EN 12312-6:2017
Release Date
2017
Published By
European Committee for Standardization (CEN)
Latest
EN 12312-6:2017
Replace
FprEN 12312-6-2016
Scope
This European Standard specifies the technical requirements to minimize the hazards listed in Clause 4 which can arise during the commissioning, the operation and the maintenance of deicers and equipment designed exclusively for de-icing and washing of aircraft with de-icing/anti-icing/washing liquids when used as intended, including misuse reasonably foreseeable by the manufacturer, when carried out in accordance with the specifications given by the manufacturer or his authorized representative. It also takes into account some requirements recognized as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. NOTE 1 Safety of aircraft in connection with de-icing/anti-icing operations is not dealt with in this European Standard. Any, even minor, aircraft de-icing or anti-icing operation directly affects flight safety on take-off. Prevention of aeronautical accidents resulting from in-flight icing principally concerns the fluids and methods used, but it may in certain cases also concern de-icing or anti-icing equipment design or operation. These aeronautical aspects are controlled by the applicable Civil Aviation regulations ICAO 9640-AN/940, Manual of aircraft ground de-icing/anti-icing operations and EASA EU-OPS Subpart D 45 and its Acceptable Means of Compliance (AMC) and covered in ISO 11076:2012 (AEA Recommendations). They are not covered in this European Standard. This European Standard applies to: a) self-propelled deicers with fixed or mobile platform or hinged boom; b) towable deicers with fixed or mobile platform or hinged boom; c) stationary de-icing/anti-icing equipment (e. g. fixed boom, gantry or tower cranes equipped with aircraft de-icing/anti-icing fluid systems). This European Standard does not apply to: d) fixed installations, such as separate storage tanks or heating and filling stations, which are not an integrated part of the stationary de-icing equipment; e) hydraulic control systems; f) pneumatic systems; g) flow generating systems as such. No extra requirements on noise and vibration are provided other than those in EN 1915-3 and EN 1915-4. NOTE 2 EN 1915-3 and EN 1915-4 provide the general GSE vibration and noise requirements. This European Standard is not dealing with hazards in respect to a standard automotive chassis and the traffic on the apron. This part of EN 12312 is not applicable to deicers and de-icing/anti-icing equipment which are manufactured before the date of publication of this standard by CEN. This part of EN 12312 when used in conjunction with EN 1915-1, EN 1915-2, EN 1915-3 and EN 1915-4 provides the requirements for deicers and de-icing/anti-icing equipment.

EN 12312-6:2017 Referenced Document

  • DIN 51130:2014-02 Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test
  • EN 143:2000 Respiratory protective devices - Particle filters - Requirements, testing, marking
  • EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing
  • EN 1822-1:2009 High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking*2024-04-20 Update
  • EN 1915-1:2013 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
  • EN 779:2012 Particulate air filters for general ventilation - Determination of the filtration performance
  • EN 795:2012 Personal fall protection equipment - Anchor devices
  • EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)*2024-04-20 Update
  • EN ISO 13688:2013 Protective clothing - General requirements
  • EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
  • EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
  • EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design
  • EN ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008)
  • ICAO 9640-2000 Manual of Aircraft Ground De-Icing/Anti-Icing Operations Second Edition; Printed: 03/2001
  • ISO 11075:2007 Aircraft - De-icing/anti-icing fluids - ISO type I
  • ISO 11076:2012 Aircraft - De-icing/anti-icing methods on the ground
  • ISO 11077:2014 Aircraft ground equipment - De-icers - Functional requirements
  • ISO 11078:2007 Aircraft - De-icing/anti-icing fluids - ISO types II, III and IV
  • ISO 4305:2014 Mobile cranes - Determination of stability
  • ISO 6966-2:2014 Aircraft ground equipment - Basic requirements - Part 2: Safety requirements
  • SAE AMS1424/1-2016 Deicing/Anti-Icing Fluid, Aircraft SAE Type I Glycol (Conventional and Non-Conventional) Based
  • SAE AMS1424/2-2016 Deicing/Anti-Icing Fluid, Aircraft SAE Type I Non-Glycol Based
  • SAE AMS1428/1-2017 Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV Glycol (Conventional and Non-Conventional) Based

EN 12312-6:2017 history

  • 2017 EN 12312-6:2017 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment
  • 2004 EN 12312-6:2004 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment (Incorporates Amendment A1: 2009)



Copyright ©2024 All Rights Reserved