This European Standard defines principles of glazing as well as recommendations on the selection of components, e. g. frame sections, beads, drainage holes, etc., for fitting glazing into frames of any material. This European Standard applies to all basic types of edge supported vertical and sloping glazing systems, in all types of fixed or opening frames used in buildings. This European standard specifies also the functions, requirements and installation of glazing blocks within a frame during its manufacturing, transportation, installation and operational life. The standard applies to glazing blocks used for all types of flat or curved glass, as well as to derived processed types of glass. For certain glass products, e. g. fire resistant glazing, security glass, other or additional requirements, rules or recommendations may apply. The standard is applicable to European climate conditions. This European Standard does not apply to the following: - glass blocks and glass pavers (EN 1051-1); - channel-shaped glass (EN 572-7); - structural sealant glazing (see EN 13022-1 and EN 13022-2 and ETAG 002); - adhesively bonded glazing in window; - point fixed glazing; - greenhouses (see EN 13031-1). As this standard gives basic assembly principles only, national requirements, rules or recommendations may also apply.
EN 12488:2016 Referenced Document
EN 1036-1:2007 Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions@ requirements and test methods
EN 1036-2:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
EN 1051-1:2003 Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description
EN 1051-2:2007 Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 1096-1:2012 Glass in building - Coated glass - Part 1: Definitions and classification
EN 1096-2:2012 Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings
EN 1096-3:2012 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
EN 1096-4:2004 Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 1096-5:2016 Glass in building - Coated glass - Part 5 - Test method and classification for the self-cleaning performances of coated glass surfaces
EN 12150-1:2015 Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
EN 12150-2:2004 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Products standard*， 2024-04-20 Update
EN 12337-1:2000 Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description
EN 12337-2:2004 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 12365-1:2003 Building hardware - Gasket and weatherstripping for doors, windows, shutters and curtain walling - Part 1: Performance requirements and classification
EN 12519:2004 Windows and pedestrian doors - Terminology
EN 12543-1:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
EN 12543-3:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method
EN 1279-1:2004 Glass in Building - Insulating glass units - Part 1: Generalities, dimensional tolerances and rules for the system description
EN 1748-2-1:2004 Glass in building - Special basic products - Glass ceramics - Part 2-1: Definitions and general physical and mechanical properties
EN 1748-2-2:2004 Glass in building - Special basic product - Part 2-2: Glass ceramics - Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 1863-1:2011 Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description*， 2024-04-20 Update
EN 1863-2:2004 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 572-2:2012 Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
EN 572-3:2012 Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass
EN 572-4:2012 Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass
EN 572-5:2012 Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass
EN 572-6:2012 Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass
EN 572-7:2012 Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass
EN 572-9:2004 Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard*， 2024-04-20 Update
EN 12488:2016 history
2016EN 12488:2016 Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing