EN 12200-1:2016 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes@ fittings and the system
This European Standard specifies the requirements for pipes, fittings, brackets and the system of unplasticized poly(vinyl chloride) (PVC-U) intended for use as above-ground external rainwater piping systems. It also specifies: a) The requirements for metallic brackets. b) Both solid wall pipes and fittings, (i.e. product manufactured from a single layer), as well as solid wall multi-layer pipes. c) The test parameters for the test methods referred to in this standard. Pipes can be used in conjunction with fittings and brackets of acrylic materials provided these polymers meet the performance requirements of this standard. The products are usually used in conjunction with gutters conforming to EN 607. They are not intended for use with products conforming to EN 612. This standard is applicable to PVC-U rainwater systems of circular, square, rectangular or any other shape with sealed (rubber ring or solvent cement) or unsealed joints. This standard covers a range of pipes and fittings sizes. NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from the size range to take into account their particular requirements and any relevant national regulations and installation practices or codes. NOTE 2 The term "rainwater" in this standard is used also to encompass "surface water" (as defined in EN 752) run-off from buildings.
EN 12200-1:2016 Referenced Document
EN 12056-3:2000 Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation
EN 12095:1997 Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength
EN 1462:2004 Brackets for Eaves Gutters - Requirements and Testing
EN 14680:2015 Adhesives for non-pressure thermoplastics piping systems - Specifications
EN 14814:2007 Adhesives for thermoplastic piping systems for fluids under pressure - Specifications
EN 15346:2014 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
EN 1905:1998 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
EN 20105-A02:1994 Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
EN 476:2011 General requirements for components used in drains and sewers
EN 513:1999 Unplasticized Polyvinylchoride (PVC-U) Profiles for the Fabrication of Windows and Doors - Determination of the Resistance to Artificial Weathering
EN 607:2004 Eaves Gutters and Fittings Made of PVC-U - Definitions@ Requirements and Testing*, 2024-04-20 Update
EN 612:2005 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
EN 681-1:1996 Elastomeric Seals - Material Requirements for Pipe Joint Seals Used in Water and Drainage Applications - Part 1: Vulcanized Rubber (Incorporates Amendment A1: 1998)
EN 681-2:2000 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
EN 752:2008 Drain and sewer systems outside buildings
EN ISO 1043-1:2011 Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)*, 2024-04-20 Update
EN ISO 13229:2011 Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
EN ISO 2505:2005 Thermoplastics pipes - Longitudinal reversion - Test method and parameters
EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)*, 2024-04-20 Update
EN ISO 3126:2005 Plastics piping systems - Plastics components - Determination of dimensions ISO 3126:2005
EN ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
EN ISO 4892-3:2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
EN ISO 580:2005 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
EN ISO 8256:2004 Plastics - Determination of tensile-impact strength
ISO 13254:2010 Thermoplastics piping systems for non-pressure applications - Test method for watertightness
ISO 3127:1994 Thermoplastics pipes - Determination of resistance to external blows - Round-the-clock method
ISO 6259-2:1997 Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
EN 12200-1:2016 history
2016EN 12200-1:2016 Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes@ fittings and the system
2000EN 12200-1:2000 Plastics Rainwater Piping Systems for Above Ground External Use - Unplasticized Poly (Vinyl Chloride) (PVC-U) - Part 1: Specifications for Pipes, Fittings and the System