ASTM F468-16
Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- Standard No.
- ASTM F468-16
- Release Date
- 2016
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM F468-22
- Latest
- ASTM F468-23
- Scope
12.1 For purposes of determining compliance with the specified limits for requirements of the properties listed in this specification, an observed value or calculated value shall be rounded in accordance with Practice E29.
1.1 This specification covers the requirements for commercial wrought nonferrous bolts, hex cap screws, and studs 0.250 to 1.500 in. and socket head cap screws (including socket head cap, button head and flat countersunk head configurations) with nominal thread 0.06 (size 0) through 1.500 in. inclusive in diameter manufactured from a number of alloys in common use and intended for general service applications.
1.2 Applicable nuts for use with bolts, cap screws, and studs covered by this specification are covered by Specification F467.
1.2.1 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
Note 1: A complete metric companion to Specification F468 has been developed—F468M; therefore no metric equivalents are presented in this specification.
ASTM F468-16 Referenced Document
- ASME B1.1 Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)
- ASME B1.3
- ASME B18.2.1 Square@ Hex@ Heavy Hex@ and Askew Head Bolts and Hex@ Heavy Hex@ Hex Flange@ Lobed Head@ and Lag Screws (Inch Series) (Includes Errata July 2013)
- ASME B18.3 Hexagonal keyed and splined cylindrical head hexagonal shouldered set screws (Imperial series)
- ASTM B154 Standard Test Method for Mercurous Nitrate Test for Copper and Copper Alloys
- ASTM B193 Standard Test Method for Resistivity of Electrical Conductor Materials
- ASTM B211 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
- ASTM B565 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
- ASTM B574 Spec for Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
- ASTM D3951 Standard Practice for Commercial Packaging
- ASTM E101
- ASTM E120 Standard Test Methods for Chemical Analysis of Titanium and Titanium Alloys (Withdrawn 2003)
- ASTM E1409 Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
- ASTM E165/E165M Standard Practice for Liquid Penetrant Testing for General Industry
- ASTM E18 Standard Test Methods for Rockwell Hardness of Metallic Materials
- ASTM E227 Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique (Withdrawn 2002)
- ASTM E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
- ASTM E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
- ASTM E354 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
- ASTM E38
- ASTM E478 Standard Test Methods for Chemical Analysis of Copper Alloys
- ASTM E53 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
- ASTM E54
- ASTM E55 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
- ASTM E62 Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
- ASTM E75 Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
- ASTM E76 Standard Test Methods for Chemical Analysis of Nickel-Copper Alloys (Withdrawn 2003)
- ASTM E8/E8M Standard Test Methods for Tension Testing of Metallic Materials
- ASTM E92 Standard Test Method for Vickers Hardness of Metallic Materials
- ASTM F1470 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
- ASTM F467 Standard Specification for Nonferrous Nuts for General Use
- ASTM F606/F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
- ASTM F788 Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
ASTM F468-16 history
- 2023 ASTM F468-23 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- 2022 ASTM F468-22 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- 2016 ASTM F468-16 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- 2015 ASTM F468-15e1 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- 2015 ASTM F468-15 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- 2013 ASTM F468-13 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- 2012 ASTM F468-12 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- 2010 ASTM F468-10 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- 2006 ASTM F468-06e1 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- 2006 ASTM F468-06 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- 2005 ASTM F468-05a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- 2005 ASTM F468-05 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- 2003 ASTM F468-03a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- 2003 ASTM F468-03 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- 2001 ASTM F468-01a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- 2001 ASTM F468-01e1 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- 2001 ASTM F468-01 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- 1998 ASTM F468-98 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
