DIN ISO 21940-12:2016
Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016)

Standard No.

DIN ISO 21940-12:2016

Release Date

2016

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN ISO 21940-12:2016-09

Latest

DIN ISO 21940-12:2016-09

Replace

DIN ISO 11342:1999 DIN ISO 11342 Berichtigung 1:2001 DIN ISO 21940-12:2014

DIN ISO 21940-12:2016 Referenced Document

• DIN ISO 10816-1:1997 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines (ISO 10816-1:1995)
• DIN ISO 10816-21:2015 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 21: Horizontal axis wind turbines with gearbox (ISO 10816-21:2015)
• DIN ISO 10816-2:2010 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 10816
• DIN ISO 10816-3:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ (ISO 10816-3:2009); Englis
• DIN ISO 10816-4:2010 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4: Gas turbine sets with fluid-film bearings (ISO 10816-4:2009)
• DIN ISO 10816-6:2015 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 6: Reciprocating machines with power ratings above 100 kW (ISO 10816-6:1995 + Amd.1:2015)
• DIN ISO 10816-7:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts (ISO 10816-7:2009); English version of DIN ISO 10816-7:2009-08
• DIN ISO 10816-8:2014 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 8: Reciprocating compressor systems (ISO 10816-8:2014)
• DIN ISO 1925:2002 Mechanical vibration - Balancing - Vocabulary (ISO 1925:2001)
• DIN ISO 21940-13:2012 Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 21940-13:2012)
• DIN ISO 21940-14:2012 Mechanical vibration - Rotor balancing - Part 14: Procedures for assessing balance errors (ISO 21940-14:2012)
• DIN ISO 21940-21:2013 Mechanical vibration - Rotor balancing - Part 21: Description and evaluation of balancing machines (ISO 21940-21:2012)
• DIN ISO 21940-23:2012 Mechanical vibration - Rotor balancing - Part 23: Enclosures and other protective measures for the measuring station of balancing machines (ISO 21940-23:2012)
• DIN ISO 21940-32:2012 Mechanical vibration - Rotor balancing - Part 32: Shaft and fitment key convention (ISO 21940-32:2012)
• DIN ISO 7919-1:1997 Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation - Part 1: General guidelines (ISO 7919-1:1996)
• DIN ISO 7919-2:2010 Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min (ISO 7919-2:2
• DIN ISO 7919-3:2009 Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines (ISO 7919-3:2009); English version of DIN ISO 7919-3:2009-08
• DIN ISO 7919-4:2010 Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 4: Gas turbine sets with fluid-film bearings (ISO 7919-4:2009)
• DIN ISO 7919-5:2005 Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants (ISO 7919-5:2005)
• ISO 1925:2001 Mechanical vibration - Balancing - Vocabulary
• ISO 2041:2009 Mechanical vibration, shock and condition monitoring - Vocabulary

DIN ISO 21940-12:2016 history

• 2016 DIN ISO 21940-12:2016-09 Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016)
• 2016 DIN ISO 21940-12:2016 Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016)
• 2015 DIN ISO 21940-12 Beiblatt 1:2015-04 Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour - Supplement 1: Procedure for balancing at multiple rotational speeds
• 2015 DIN ISO 21940-12 Bb.1:2015 Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour - Supplement 1: Procedure for balancing at multiple rotational speeds
• 1970 DIN ISO 21940-12 E:2014-10
• 0000 DIN ISO 21940-12:2014
• 2001 DIN ISO 11342 Berichtigung 1:2001 Corrigenda to DIN ISO 11342:1999-05 (ISO 11342:1998/Cor. 1:2000)
• 1999 DIN ISO 11342:1999 Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors (ISO 11342:1998)
• 0000 DIN ISO 11342:1998

DIN ISO 21940-12:2016 Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016) has been changed from DIN ISO 11342:1999 Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors (ISO 11342:1998).

DIN ISO 21940-12:2016 Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour (ISO 21940-12:2016) has been changed from DIN ISO 11342 Berichtigung 1:2001 Corrigenda to DIN ISO 11342:1999-05 (ISO 11342:1998/Cor. 1:2000).