ASTM C488-16
Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
- Standard No.
- ASTM C488-16
- Release Date
- 2016
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM C488-16(2023)
- Latest
- ASTM C488-16(2023)
- Scope
5.1 Both physical and chemical changes possibly occur from weather exposure, and these changes affect performance properties, service life, and maintenance schedules. For this reason, tests of properties relating to performance shall be made both before and after specific periods of outdoor exposure.
5.2 This test method recognizes that differing geographical locations, environmental conditions, differences between surface temperatures and ambient temperatures, and test durations have extremely varied effects upon the test results.
5.3 This test method is to be used for comparative qualitative testing.
1.1 This test method covers out-of-doors exposure testing of finishes that are normally field-applied to thermal insulation and possibly include joints or joint sealants, or both. Such exposure is essential prior to the determination of certain physical properties when the finish is to be exposed to exterior weather conditions. This test method also indicates possible compatibility problems between the joint sealant and the finish as well as the ability of the finish to span a dry joint. This test method is not intended to evaluate mildew resistance, efflorescence, or chemical resistance.
Note 1: For testing free plastic films, see Practice D1435.
1.2 This test method does not prescribe the method of application, test duration, or inspection intervals.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM C488-16 Referenced Document
- ASTM C168 Standard Terminology Relating to Thermal Insulation
- ASTM D1435 Standard Practice for Outdoor Weathering of Plastics
ASTM C488-16 history
- 2023 ASTM C488-16(2023) Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
- 2016 ASTM C488-16 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
- 2005 ASTM C488-05(2010) Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
- 2005 ASTM C488-05 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
- 1983 ASTM C488-83(2004) Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
- 1983 ASTM C488-83(1998) Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
