ASTM D2131-97(2016)
Standard Classification for Natural Muscovite Mica Splittings

Standard No.
ASTM D2131-97(2016)
Release Date
1997
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D2131-22
Latest
ASTM D2131-22
Scope

1.1 This specification covers the determination of muscovite mica splittings of standard commercial grades and specifies the maximum allowable physical defects for each grade. It is applicable to commercially available natural muscovite mica splittings regardless of the basic color of the mica or its source.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.3 This standard is very similar to ISO 6386. It is expected that materials would be classified identically using the criteria of either standard. The grades shown under “ASTM Grade No.” in Table 1 and Table 2 are shown under “Old Grade No.” in ISO 6386-1981.

(A) 1 in.28201;=8201;6.45 cm2 .
(B) 1 in.8201;=8201;25.4 mm (exact).
(C) Minimum and maximum thickness of a single splitting in the case of bookform splittings shall be agreed upon between the purchaser and the seller.
(D) Upon agreement between the buyer and the seller, the minimum area may be 11/2 in.2 (9.7 cm 2).
(A) Not to be included with total allowable defects.
(B) Lots that contain more than 28201;% of stained splittings in which the sum of the major dimensions of the stains exceed 1/4 in. (6.4 mm) shall not be regarded as meeting these standards. No mineral stain shall be permitted in Bookform Splittings. No more than 308201;% of the stain in Nos. 4, 5, and 51/2 Loose with Powder shall be mineral stain. No more than 408201;% of the stain in Nos. 6 Loose with Powder, 6-1st, 6-2nd, and 6-3rd Loose, shall be mineral stain.
(C) To include an evaluation of undersize splittings for other defects.
(D) Examine for the defect listed.
(E) No hole shall be permitted.
(F) Count as a defect if more than 208201;% of the periphery is rough or burred.
(G) Same as FootnoteF except 358201;%.

ASTM D2131-97(2016) Referenced Document

  • ASTM D1711 Standard Terminology Relating to Electrical Insulation*， 1999-04-20 Update
  • ASTM D351 Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
  • ISO 6386:1981 Muscovite mica splittings; Grading and visual classification

ASTM D2131-97(2016) history

Standard Classification for Natural Muscovite Mica Splittings


Copyright ©2024 All Rights Reserved