EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
This part of EN 12629, taken together with EN 12629-1:2000+A1:2010 applies to stationary and mobile equipment for the benched manufacture of prestressed products. The manufacturing bed is a machine with which other associated machines work simultaneously. Moreover, these machines are generally used on beds installed in parallel. EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium-silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers. This standard gives particular requirements for the design of the following machines: Pre-stressing bed (schematic representation is given in annex A); Bed sweeper, vacuum cleaner, oiler, wire-guide machine (schematic representation is given in annex B); Bed layout machine (schematic representation is given in annex C); Strand pushing/pulling machine (schematic representation is given in annex D); Spinner, extruder, vibrodistributor (schematic representation is given in annex E); Tarpaulin paying out and winding in machine (schematic representation is given in annex F); Sawing machine (schematic representation is given in annex G). NOTE The manufacturing operations include some or all of the following: treating pre-stressing bed with release agent; "marking out" the elements (slabs, plain slabs, etc.) to be made; running the pre-stressing strands; pre-tensioning; installing the shutterings, (formwork, side shutters, end plates and inserts) fixing reinforcement; tensioning; concrete distribution and compaction; winding out the tarpaulin; heating; detensioning; removal of shettering, formwork, etc.; strands cutting or sawing; removal of final products; bed cleaning. The concrete supply interface which is taken into account for safety is also considered. The sequence of these operations can be different according to the manufacturing process used in the factory and to the various types of products. The handling of the cut wires and their placement on beds is not covered by the present standard. This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. Sub-clause of EN 12629-1:2000+A1:2010 applies. This document is applicable to equipment for long-line manufacture of pre-stressed product which are manufactured after the date of publication of this document by CEN.
EN 12629-7:2004+A1:2010 Referenced Document
EN 1088:1995 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection Incorporates Amendment A2: 2008
EN 1093-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods*， 2024-04-20 Update
EN 457:1992 Safety of machinery; auditory danger signals; general requirements, design and testing (ISO 7731:1986, modified)
EN 842:1996 Safety of machinery - Visual danger signals - General requirements, design and testing (Incorporates Amendment A1: 2008)
EN 954-1:1996 Safety of Machinery - Safety-Related Parts of Control Systems - Part 1: General Principles for Design
EN 982:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics Incorporates Amendment A1: 2008
EN 12629-7:2004+A1:2010 history
2010EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products
2004EN 12629-7:2004 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products (Incorporates Amendment A1: 2010)