EN 14010:2003+A1:2009 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
This European Standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during installation, operation and maintenance of permanently installed equipment and systems for the power driven parking of motor vehicles, as defined in 3.1 to 3.4 below. Requirements are also given on the provision of information for use, which includes requirements for the drafting of the instructions. Electromagnetic compatibility requirements are also covered. This European Standard applies to equipment and systems for the power driven parking of motor vehicles which have four wheels, are within a maximum size envelope of 5,30 m long, by 2,30 m wide, by 2,20 m high and have a mass less than 2500 kg. The equipment can be manually or automatically controlled.
EN 14010:2003+A1:2009 Referenced Document
EN 1005-2:2003 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery (Incorporates Amendment A1: 2008)
EN 1005-3:2002 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation Incorporates Amendment A1: 2008
EN 1037:1995 Safety of machinery - Prevention of unexpected start-up (Incorporates Amendment A1: 2008)
EN 1050:1996 Safety of Machinery - Principles for Risk Assessment
EN 294:1992 Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs
EN 349:1993 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (Incorporates Amendment A1: 2008)
EN 418:1992 Safety of machinery; emergency stop equipment, functional aspects; principles for design
EN 457:1992 Safety of machinery; auditory danger signals; general requirements, design and testing (ISO 7731:1986, modified)
EN 811:1996 Safety of Machinery - Safety Distances to Prevent Danger Zones Being Reached by the Lower Limbs
EN 842:1996 Safety of machinery - Visual danger signals - General requirements, design and testing (Incorporates Amendment A1: 2008)
EN 894-2:1997 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays (Incorporates Amendment A1: 2008)
EN 953:1997 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (Incorporates Amendment A1: 2009)
EN 954-1:1996 Safety of Machinery - Safety-Related Parts of Control Systems - Part 1: General Principles for Design
EN 982:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics Incorporates Amendment A1: 2008
EN 14010:2003+A1:2009 history
2009EN 14010:2003+A1:2009 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
2003EN 14010:2003 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (Incorporates Amendment A1: 2009)