EN 14398-2-2003EN 14398-2/AC-2006EN 14398-2/A1-2006EN 14398-2/prA2-2007
Scope
This European Standard specifies requirements for the design, fabrication, inspection and testing of large transportable non vacuum insulated cryogenic vessels of more than 1000 l volume, which are permanently (fixed tanks) or not permanently (demountable tanks) attached to a vehicle, for carriage by road. However, it can be used for other mode of transport providing the specific regulations/requirements are complied with. This European Standard applies to large transportable non vacuum insulated cryogenic vessels for fluids specified in EN 14398-1 and does not apply to vessels designed for toxic fluids. This European Standard does not include the general vehicle requirements e. g. running gear, brakes, lighting etc. that shall be in accordance with the relevant standards/regulations.
EN 14398-2:2003+A2:2008 Referenced Document
EN 10028-4:2003 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties Incorporating Corrigendum December 2005
EN 10028-7:2000 Flat Products Made of Steels for Pressure Purposes - Part 7: Stainless Steels
EN 1252-1:1998 Cryogenic vessels Materials Part 1: Toughness requirements for temperatures below p80 °C (Incorporating corrigendum December 1998)
EN 1252-2:2001 Cryogenic Vessels - Materials - Part 2: Toughness Requirements for Temperatures between -80 degrees C and -20 Degrees C
EN 1418:1997 Welding Personnel - Approval Testing of Welding Operators for Fusion Welding and Resistance Weld Setters for Fully Mechanized and Automatic Welding of Metallic Materials
EN 1435:1997 Non-destructive testing of welds Radiographic testing of welded joints Includes amendments A1:2002 and A2:2003
EN 1626:1999 Cryogenic Vessels - Valves for Cryogenic Service
EN 1797:2001 Cryogenic vessels - Gas/material compatibility
EN 287-1:2004 Qualification test of welders - Fusion welding - Part 1: Steels Incorporating Corrigendum August 2004; Includes Amendment A2:2006
EN 473:2000 Non-Destructive Testing - Qualification and Certification of NDT Personnel - General Principles includes amendment A1:2005; Supersedes CR 12459:1996*, 2024-04-20 Update
EN 875:1995 Destructive Tests on Welds in Metallic Materials - Impact Tests - Test Specimen Location, Notch Orientation and Examination
EN 895:1995 Destructive Tests on Welds in Metallic Materials - Transverse Tensile Test
EN 910:1996 Destructive Tests on Welds in Metallic Materials - Bend Tests
EN 14398-2:2003+A2:2008 history
2008EN 14398-2:2003+A2:2008 Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
2003EN 14398-2:2003 Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing Incorporates Amendment A2: 2008