DIN 89300:2016
Junction inserts with mantle terminals - 16 A, 500 V, for conductors up to 2,5 mm2

Standard No.

DIN 89300:2016

Release Date

2016

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN 89300:2016-03

Latest

DIN 89300:2016-03

Replace

DIN 89300:1995 DIN 89300:2014

DIN 89300:2016 Referenced Document

• DIN 40680-1:1983 Ceramic components for electrical purposes; admissible tolerances
• DIN 89250:2016 Junction boxes - AC/DC 16 A, 500 V, degree of protection IP56
• DIN 89262:2016 Double-pole socket-outlets with protective contact - DC 10 A, AC 16 A, AC/DC 250 V, degree of protection IP56
• DIN 89263:2016 Double-pole socket-outlets with protective contact - Switchable - AC/DC 10 A, AC/DC 250 V, degree of protection IP56
• DIN EN 12164:2011 Copper and copper alloys - Rod for free machining purposes; German version EN 12164:2011
• DIN EN 60309-1:2013 Plugs, socket-outlets and couplers for industrial purposes.Part 1: General requirements (IEC 60309-1:1999 + A1:2005, modified + A2:2012); German version EN 60309-1:1999 + A1:2007 + A2:2012
• DIN EN 60664-1:2008 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests (IEC 60664-1:2007); German version EN 60664-1:2007
• DIN EN 60672-3:1999 Ceramic and glass-insulating materials - Part 3: Specifications for individual materials (IEC 60672-3:1997); German version EN 60672-3:1997
• DIN EN 60998-1:2005 Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements (IEC 60998-1:2002, modified); German version EN 60998-1:2004
• DIN EN 60998-2-4:2006 Connecting devices for low voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices (IEC 60998-2-4:2004, modified); German version EN 60998-2-4:2005
• DIN EN 60999-1:2000 Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 1:General requirements and particular requirements for clamping units for conductors 0,2 mm<(hoch)2> up to 35 mm<(hoch)2> (inclu
• DIN EN ISO 1456:2009 Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO 1456:2009); German version EN ISO 1456:2009

DIN 89300:2016 history

• 2016 DIN 89300:2016-03 Junction inserts with mantle terminals - 16 A, 500 V, for conductors up to 2,5 mm<(hoch)2>
• 2016 DIN 89300:2016 Junction inserts with mantle terminals - 16 A, 500 V, for conductors up to 2,5 mm2
• 1995 DIN 89300:1995 Terminal connectors with clamping-screw, 16 A, 500 V, for nominal cross-sectional areas up to 2,5 mm<(hoch)2>
• 0000 DIN 89300:1979