DIN 802-3:2016
Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion

Standard No.

DIN 802-3:2016

Release Date

2016

Published By

German Institute for Standardization

Status

Be replaced

Replace By

DIN 802-3:2016-03

Latest

DIN 802-3:2016-03

Replace

DIN 802-3:2008 DIN 802-3:2015

DIN 802-3:2016 Referenced Document

• DIN 2197-1:2015 Screwing taps - Part 1: Technical delivery conditions for ground high-speed steel taps
• DIN 5156:2008 Machine taps for pipe threads G 1/16 to G 2 and Rp 1/16 to Rp 2
• DIN 802-4:2012 Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion
• DIN 802-5:1997 Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion
• DIN 802-6:2003 Manufacturing to tolerances on the threaded portion of screwing taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts as in DIN 8140 for ISO metric coarse and fine pitch threads
• DIN EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
• DIN EN 22857:1990 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; manufacturing tolerances on the threaded portion (ISO 2857:1973 incl. AMD 1:1984 and AMD 2:1986); german version EN 22857:1989
• DIN EN ISO 228-1 Beiblatt 1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation - Limits of size
• DIN EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003
• DIN ISO 11054:2006 Cutting tools - Designation of high-speed steel groups (ISO 11054:2006) English version of DIN ISO 11054:2006-09

DIN 802-3:2016 history

• 2016 DIN 802-3:2016-03 Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
• 2016 DIN 802-3:2016 Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
• 2008 DIN 802-3:2008 Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion
• 1985 DIN 802-3:1985 Tolerances on the threaded portion of taps; taps for pipe threads