DIN EN 16678:2016
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa; German version EN 16678:2015
- Standard No.
- DIN EN 16678:2016
- Release Date
- 2016
- Published By
- German Institute for Standardization
- Status
- Replace By
- DIN EN 16678:2016-02
- Latest
- DIN EN 16678:2020-06
- Replace
- DIN 3394-1:2004 DIN EN 16678:2013
DIN EN 16678:2016 Referenced Document
- EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads; Dimensions, tolerances and designation
- EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
- EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
- EN 1092-3:2003 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories PN designated - Part 3: Copper alloy flanges
- EN 1092-4:2002 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
- EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
- EN 12516-1:2014 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
- EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
- EN 12516-3:2002 Valves - Shell design strength - Part 3: Experimental method*， 2023-12-23 Update
- EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
- EN 12627:1999 Industrial valves - Butt welding ends for steels valves
- EN 12760:1999 Valves - Socket Welding Ends for Steel Valves
- EN 13906-1:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs
- EN 13906-2:2013 Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs
- EN 175301-803:2006 Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable
- EN 1759-1:2004 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 1: Steel flanges, NPS 1/2 to 24*， 2023-12-23 Update
- EN 1759-3:2003 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges Incorporating Corrigendum July 2004
- EN 1759-4:2003 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
- EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
- EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
- EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipmemt
- EN 60529:1991 Degrees of Protection Provided by Enclosures (IP Code) (Incorporates Amendments A1: 2000 and A2: 2013)
- EN 60730-1:2011 Automatic electrical controls for household and similar use - Part 1: General requirements*， 2023-12-23 Update
- EN 61058-1:2002 Switches for appliances Part 1: General requirements (Incorporates Amendment A2: 2008)
- EN 682:2002 Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
- ISO 1431 Withdrawal of ISO 1431-1972
- ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
DIN EN 16678:2016 history
- 2020 DIN EN 16678:2020-06 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6300 kPa; German and English version prEN 16678:2020 / Note: Date of issue 2020-05-08*Intended...
- 2020 DIN EN 16678:2020 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6300 kPa; German and English version prEN 16678:2020
- 2016 DIN EN 16678:2016-02 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa; German version EN 16678:2015 / Note: To be replaced by DIN EN 16678 (2020-06).
- 2016 DIN EN 16678:2016 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa; German version EN 16678:2015
- 1970 DIN EN 16678 E:2013-10
- 0000 DIN EN 16678:2013
- 2004 DIN 3394-1:2004 Automatic control valves - Part 1: Pressure relief, safety and regulating valves for pressure above 4 bar up to 16 bar
- 0000 DIN 3394-1:2000
