General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 32333-2015
Scope
This standard specifies the vibration (acceleration) measurement method of rolling bearings (hereinafter referred to as bearings) and the vibration (acceleration) technical conditions of deep groove ball bearings. The measurement methods specified in this standard are applicable to radial ball bearings (single-row and double-row deep groove ball bearings, self-aligning ball bearings and single-row and double-row angular contact ball bearings), self-aligning roller bearings with cylindrical bore and cylindrical outer surface , single row and double row tapered roller bearings and single row and double row cylindrical roller bearings vibration (acceleration) measurement. See Appendix A for technical conditions of vibration (acceleration) of deep groove ball bearings.
GB/T 32333-2015 Referenced Document
GB 443 Lubricating oils for total loss systems L-AN
GB/T 24610.1-2009 Rolling bearings.Measuring methods for vibration.Part 1:Fundamentals
GB/T 24610.2-2009 Rolling bearings.Measuring methods for vibration.Part 2:Radial ball bearings with cylindrical bore and outside surface
GB/T 24610.3-2009 Rolling bearings.Mearsuring methods for vibration.Part 3:Radial spherical and tapered roller bearings with cylindrical bore and outside surface
GB/T 24610.4-2009 Rolling bearings.Mearsuring methods for vibration.Part 4:Radial cylindrical roller bearings with cylindrical bore and outside surface
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
JB/T 2974 Rolling bearings-Identification code-Supplemental regulations